E-Flite Albatros D.Va 25e ARF Airplane EFL4605

This is the E-Flite Albatros D.Va 25e ARF Airplane. E-Flite’s Albatros D.Va 25e is an accurate reproduction of the famed German fighter that was used during WWI with the Jasta 18 squadron.
Features:
        Top and bottom plug-in wings with carbon fiber wing tube
        Authentic wire rigging and optional pull-pull controls included
        Realistic varnished wood tail skid included
        Fully-functional, shock-absorbing landing gear with scale wheels
        Molded motor and machine gun detail
        Unique painted aluminum spinner included
        Optional cockpit kit available (EFL460515)
Made of laser-cut balsa, the E-Flite Albatros D.Va 25e is red-nosed hunter and includes the finer-point detail only available as a Platinum Series model. This plane is sure to stand the test of time, just like its full-scale cousin. Even the most discerning modeler will appreciate the exceptional level of included detail; from the exposed cylinders of the Mercedes engine and the vented barrels of its Spandau machine gun to the Lozenge camouflage covering on the bottom of the wings, this battle-bird has an authentic look from any angle.
Requires:
4+ channel transmitter and receiver radio system
Brushless outrunner motor
Brushless ESC
Propeller
Two (2) mini servos and two (2) micro servos
Flight battery
Charger for flight battery
 
spec :
    Wingspan: 53.0 in (1350mm)
    Overall Length: 44.0 in (1120mm)
    Wing Area: Top wing: 437 sq in (28.2 sq dm); Bottom wing: 318 sq in (20.5 sq dm); Total: 755 sq in (48.7 sq dm)
    Flying Weight: 5.20?5.55 lb (2.40?2.50 kg) without battery; 6.00?6.40 lb (2.70?2.90 kg) with battery
    Motor Size: Power 25?32
    Radio: 4+ channel radio required
    Servos: (2) mini servos, (2) micro servos required
    Trim Scheme Colors: UltraCote? True Red (HANU866), White (HANU870), Black (HANU874), Lozenge (EFL460517)
    CG (center of gravity): 1-9/16 to 2-3/8 in (40 to 60mm) back from leading edge of top wing
    Wing Loading: 18.3?19.5 oz/sq ft
    Prop Size: 13 x 4E (Power 25); 14 x 7E (Power 32)
    Spinner Size: 93mm
    Speed Control : 60-amp brushless
    Recommended Battery: 4S 3200mAh Li-Po
    Control Throw (Ailerons): Low: 9/16 in (14mm) up, 3/16in (4mm) down, 15% expo; High: 3/4 in (19mm) up, 1/4 in (6mm) down, 25% expo
    Control Throw (Elevator): Low: 1-3/16 in (30mm) up/down, 20% expo; High: 1-3/4 in (45mm) up/down, 30% expo
    Control Throw (Rudder): Low: 1-3/16 in (30mm) left/right, 20% expo; High: 1-3/4 in (45mm) left/right, 30% expo
    Approx. Flying Duration: 10 minutes
    Scale: 18%
    Minimum Age Recommendation: 14 years
    Experience Level: Intermediate
    Recommended Environment: Outdoor
    Assembly Time: 7-9 Hours
    Is Assembly Required: Yes