The company is one of the well-known Manufacturers, Exporters and Suppliers of Electric Chain Hoist (EH2 Series) in Kapadwanj. The Electric Chain Hoist (EH2 Series), offered by us, are one of the perfectly designed products with a proven track record of efficient performance. Known for their quality, the Electric Chain Hoist (EH2 Series) are widely in demand across the globe. Features Of Electric Chain Hoist (EH2 Series)

• Duty : Class II, 40% Intermittent duty
• Hooks : As per IS: 15560 - 2005
• Gears : Alloy Steel Material, precise machined, gear hobbed & case hardened – duly annealed. Spur Helical combination to provide strength & smooth operation. Gears shall be lubricated with a semi-liquid grease instead of oil, which is less likely to leak, eliminates oil level checks and clings to the gears even after long idle periods.
• Braking Mechanism : Disc type, Spring Loaded acting at any load position.
• Motor : Conical Rotor Motor – operating on 415 Volts, 3 Phase, 50 Hz AC Supply with In-built braking mechanism
• Control Panel Unit : Totally enclosed to protect from Weather, giving output at 24 Volts to the Operational Control Station (Push Button Station).
• Operational Control Station : Suspended from Hoist with a Cable & supporting Wire rope – with two push buttons extendable to four six push button station. Operated with 24 Volts.
• Overload Relay : Provided for protection to Motor
• Limit Switches : Provided to control movement of Hook in Hoisting motion at decided levels activated by Lower Hook & End Stop. Prevents Accidents due to Over-hoisting & Over-lowering.
• Chain Guide : Aluminum – Accurately manufactured with Machine matched recession to provide Load Chain precisely guided movement around the load chain wheel. Designed in two separate halves – ensuring ease in assemble dismantle or operation stage.
• Load Chain : 8 mm, Grade 80, Alloy Steel Material as per IS: 6216
• Load Chain Wheel : S.G. Iron Casting – Accurately pocketed with proper sitting in the Aluminum Chain Guide.
• Designed in two separate independent units – Motor Side (Driving Part) & Mechanism Side (Driven Part).
• Driven by Conical Rotor Motor – Z Start Motor (Make: Anker)
• Manufactured as per IS: 6547 (Indian Standard)
• Tested at 25 % Overload

The company is one of the well-known Manufacturers, Exporters and Suppliers of Electric Chain Hoist (EH2 Series) in Kapadwanj. The Electric Chain Hoist (EH2 Series), offered by us, are one of the perfectly designed products with a proven track record of efficient performance. Known for their quality, the Electric Chain Hoist (EH2 Series) are widely in demand across the globe. Features Of Electric Chain Hoist (EH2 Series)

• Duty : Class II, 40% Intermittent duty
• Hooks : As per IS: 15560 - 2005
• Gears : Alloy Steel Material, precise machined, gear hobbed & case hardened – duly annealed. Spur Helical combination to provide strength & smooth operation. Gears shall be lubricated with a semi-liquid grease instead of oil, which is less likely to leak, eliminates oil level checks and clings to the gears even after long idle periods.
• Braking Mechanism : Disc type, Spring Loaded acting at any load position.
• Motor : Conical Rotor Motor – operating on 415 Volts, 3 Phase, 50 Hz AC Supply with In-built braking mechanism
• Control Panel Unit : Totally enclosed to protect from Weather, giving output at 24 Volts to the Operational Control Station (Push Button Station).
• Operational Control Station : Suspended from Hoist with a Cable & supporting Wire rope – with two push buttons extendable to four six push button station. Operated with 24 Volts.
• Overload Relay : Provided for protection to Motor
• Limit Switches : Provided to control movement of Hook in Hoisting motion at decided levels activated by Lower Hook & End Stop. Prevents Accidents due to Over-hoisting & Over-lowering.
• Chain Guide : Aluminum – Accurately manufactured with Machine matched recession to provide Load Chain precisely guided movement around the load chain wheel. Designed in two separate halves – ensuring ease in assemble dismantle or operation stage.
• Load Chain : 8 mm, Grade 80, Alloy Steel Material as per IS: 6216
• Load Chain Wheel : S.G. Iron Casting – Accurately pocketed with proper sitting in the Aluminum Chain Guide.
• Designed in two separate independent units – Motor Side (Driving Part) & Mechanism Side (Driven Part).
• Driven by Conical Rotor Motor – Z Start Motor (Make: Anker)
• Manufactured as per IS: 6547 (Indian Standard)
• Tested at 25 % Overload