We are a trustworthy Electromagnetic Flow Meter Manufacturer, Supplier and Exporter In India. Our Electromagnetic Flow Meter is a micro-controller based full-bore type electromagnetic flow transmitter specially used for various industrial applications. This Electromagnetic Flow Meter accurately measures the flow rate of conductive liquids & slurries in closed pipes. Due to simple & rigid design, the flow transmitter is an obstruction less & maintenance-free instrument in place of conventional mechanical flow measuring device. The use of "Pulsed DC" technology in the Electromagnetic Flow Meter offers highest ability & better measuring accuracy in the form of electrical signal 4 - 20 mA DC linearly proportional to volumetric flow. The instrument is based on Faraday's law of electro-magnetic induction. A magnetic field is generated by the instrument in the flow tube. The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. Corresponding electrical output is provided with respect to measuring voltage.
Specifications

• Media : Liquids (Clear)
• Viscosity : 200 cp max
• Line Size : 15 NB to 300 NB
• Excitation : Pulsed DC coil
• Display
  • 16 x 2 LCD
  • 4 digit, 0.3- Red LED for Flow Rate Indication & 8 digit, 0.3- Red LED for Totalised Flow Indication
• Type of Output : 4 to 20 mA DC, Isolated
• Calibration Range : As per requirement (Factory Calibrated)
• Accuracy : +/- 0.5% F. S.
• Linearity : +/- 0.5%
• Repeatability : +/- 1%
• Process Temperature : 150 ^oC max
• Process Pressure : 10 kg/cm2 max
• Material of construction
  • Lining : Neoprene / Rubber / PTFE (PTFE)
  • Flange : MS / SS
  • Electrode : SS 316
  • Wetted Parts : SS 316
  • Body : MS
• Power Supply
  • 230 V AC, 50 Hz +/- 10%
  • 24 V DC, External
• Power Consumption : 10 VA
• Response Time : 100 m/Sec
• Isolation : 1.4 KV between Input, Output & Power Supply
• Temperature Coefficient : +/- 0.1% per 0C
• Transmitter Enclosure : Flameproof, IP-65, IIA, IIB CMRI certified
• Dimensions : As per chart on rear
• Process Connections : ASA B 16.5, Flanged
• Mounting : In-Line (Horizontal OR Vertical)
• Operating Conditions : Temperature 0 to 55 0C / Humidity 5 to 95% non condensing

• Type of Input
  • Linear
  • Square Rooted
• Input
  • Current (0-20 mA / 4-20 mA)
  • Voltage (1-5 V / 0-5 V)
  • Frequency (0-10 Khz)
• Display : 3 1/2 digit, 0.5" LED for Flow Rate Indication & 6 digit Electro-mechanical counter for Totalised Flow
• Range : Factory calibrated
• Accuracy : Better than + 0.5% of F. S.
• Open Sensor Indication : Provided
• Power Supply
  • 230 V AC
  • 24 V DC
  • 110 V AC
  • 24 V AC
• Power Consumption : Less than 10 VA
• Temperature Drift : 0.01% of F. S. per 0C change
• Response Time : 100 mSec
• Isolation : 1.4 KV between Input, Output & Power Supply
• Enclosure : MS Powder Coated
• Dimensions
  • 72 (H) x 144 (W) x 200 (D) in mm
  • 96 (H) x 96 (W) x 200 (D) in mm approx.
• Mounting : Flush of the Panel
• Weight : 2 kg (Approx.)
• Operating Conditions : Temperature 0 to 55 0C / Humidity 5 to 95% non condensing
• Optional - Transmitter Supply : 24 V DC, 30 mA
• Retransmission Output
  • 4 - 20 mA / 1-5 V, Non-Isolated
  • 4 - 20 mA / 1-5 V, Isolated

We are a trustworthy Electromagnetic Flow Meter Manufacturer, Supplier and Exporter In India. Our Electromagnetic Flow Meter is a micro-controller based full-bore type electromagnetic flow transmitter specially used for various industrial applications. This Electromagnetic Flow Meter accurately measures the flow rate of conductive liquids & slurries in closed pipes. Due to simple & rigid design, the flow transmitter is an obstruction less & maintenance-free instrument in place of conventional mechanical flow measuring device. The use of "Pulsed DC" technology in the Electromagnetic Flow Meter offers highest ability & better measuring accuracy in the form of electrical signal 4 - 20 mA DC linearly proportional to volumetric flow. The instrument is based on Faraday's law of electro-magnetic induction. A magnetic field is generated by the instrument in the flow tube. The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. Corresponding electrical output is provided with respect to measuring voltage.
Specifications

• Media : Liquids (Clear)
• Viscosity : 200 cp max
• Line Size : 15 NB to 300 NB
• Excitation : Pulsed DC coil
• Display
  • 16 x 2 LCD
  • 4 digit, 0.3- Red LED for Flow Rate Indication & 8 digit, 0.3- Red LED for Totalised Flow Indication
• Type of Output : 4 to 20 mA DC, Isolated
• Calibration Range : As per requirement (Factory Calibrated)
• Accuracy : +/- 0.5% F. S.
• Linearity : +/- 0.5%
• Repeatability : +/- 1%
• Process Temperature : 150 ^oC max
• Process Pressure : 10 kg/cm2 max
• Material of construction
  • Lining : Neoprene / Rubber / PTFE (PTFE)
  • Flange : MS / SS
  • Electrode : SS 316
  • Wetted Parts : SS 316
  • Body : MS
• Power Supply
  • 230 V AC, 50 Hz +/- 10%
  • 24 V DC, External
• Power Consumption : 10 VA
• Response Time : 100 m/Sec
• Isolation : 1.4 KV between Input, Output & Power Supply
• Temperature Coefficient : +/- 0.1% per 0C
• Transmitter Enclosure : Flameproof, IP-65, IIA, IIB CMRI certified
• Dimensions : As per chart on rear
• Process Connections : ASA B 16.5, Flanged
• Mounting : In-Line (Horizontal OR Vertical)
• Operating Conditions : Temperature 0 to 55 0C / Humidity 5 to 95% non condensing

• Type of Input
  • Linear
  • Square Rooted
• Input
  • Current (0-20 mA / 4-20 mA)
  • Voltage (1-5 V / 0-5 V)
  • Frequency (0-10 Khz)
• Display : 3 1/2 digit, 0.5" LED for Flow Rate Indication & 6 digit Electro-mechanical counter for Totalised Flow
• Range : Factory calibrated
• Accuracy : Better than + 0.5% of F. S.
• Open Sensor Indication : Provided
• Power Supply
  • 230 V AC
  • 24 V DC
  • 110 V AC
  • 24 V AC
• Power Consumption : Less than 10 VA
• Temperature Drift : 0.01% of F. S. per 0C change
• Response Time : 100 mSec
• Isolation : 1.4 KV between Input, Output & Power Supply
• Enclosure : MS Powder Coated
• Dimensions
  • 72 (H) x 144 (W) x 200 (D) in mm
  • 96 (H) x 96 (W) x 200 (D) in mm approx.
• Mounting : Flush of the Panel
• Weight : 2 kg (Approx.)
• Operating Conditions : Temperature 0 to 55 0C / Humidity 5 to 95% non condensing
• Optional - Transmitter Supply : 24 V DC, 30 mA
• Retransmission Output
  • 4 - 20 mA / 1-5 V, Non-Isolated
  • 4 - 20 mA / 1-5 V, Isolated