Electromagnetic Flowmeter

We are offering electromagnetic flowmeter.
Main features
1. No moving parts inside measuring pipe, easy maintenance and management. Unimpeded flow of parts, less pressure loss.
2. Fluid density, viscosity, temperature, pressure and electrical conductivity change does not affect the flow measurement, a linear relationship between mean velocity and the sensor of voltage signal, high accuracy. 3. A reasonable selection of lining and electrode materials, achieving good corrosion resistance and wear resistance. 4. Low-frequency square wave excitation, good ant-jamming, reliable and stable5. Wide-range meter, lower limit of the measured low velocity
main technical parameters
1. Meter diameter: dn10~dn1600
2. Nominal pressure rating: pn1.0~pn4.0 (special requirement need supply by agreement)
3. Flange coupling: chinese standard gb/9119-2000 [carbon steel, stainless steel] [oem]
following required flange standard by customer & supply with agreement.
[metric /inch unit]our company supply the inch unit with usa, german & japanese standard & etc.
4. Medium temperature: -20° c~120° c
5. Protection level: ip65, ip67, ip68
6. Electrode: 1. Standard stainless steel 1cr18ni9ti (0cr18ni12mo2ti)
2. Hastelloy b or c, titanium, tantalum, platinum iridium alloy.
7. Measuring tube: stainless steel 1cr18ni9ti[chinese standard] or stainless steel 304
8. Lining: polyurethane rubber, soft rubber, hard rubber, neoprene rubber, fluoroplastics.
9. Electrical conductivity of measured medium: ≥ 5μ s/cm
10. Flow velocity: calibrated span 0.4m/s -- 10m/s.
11. Measuring accuracy: 0.2%, 0.5%, 1.0%, 1.5%
12. Working volt: 220vac± 10%; 24vdc± 10%;
13. Maximum power dissipation: ≤ 20va
14. Communication: rs485 hart
15. Current signal output: 0~10ma, 4~20ma[24vdc, 220vac power supply]
volume pulse output: 0~100 pulse/s
frequency output: 0~50hz