Emulsified Bitumen for Construction

ApplicationConstruction
Number Of FlowerEmulsified
Packed InMetal Drum
Supply TypeManufacturer, Supplier, Retailer
Preferred Buyer Location All over the world

Details : Rapid Setting Emulsion (RS} - Break is rapid even with coarse aggregate of relatively low surface area. Rapid setting Emulsion is further sub divided into RS-1 and RS-2 types. Medium Setting Emulsion (MS} - Break is sufficiently slow that the emulsion can be mixed with coarse aggregate containing a high proportion of fine material. Slow Setting Emulsion (SS} - Break is sufficiently slow to allow mixing with aggregate containing fine material of relatively high surface area.Slow setting emulsion is further sub divided into SS-1 and SS-2 types.

View More Details

Send Enquiry

Product Details

Technical Requirements Of BitumenEmulsion (Cationic Type) IS:8887:2004

Characteristics	Grade of Emulsion
Characteristics	RS-1	RS-2	MS	SS-1	SS-2
Residue on 600 micron IS sieve (Percent by mass) Max.	0.05	0.05	0.05	0.05	0.05
Viscosity by Saybolt Furol Viscometer, Sec 25^oC 50^oC	- 20-100	- 10Q-300	- 50-300	20-100 -	30-150 -
Coagulation of Emulsion At low temperature	Nil	Nil	Nil	Nil	Nil
Storage Stability after 24 hrs. Percent Max.	2	1	1	2	2
Particle Charge	Positive	Positive	Positive	Positive	Positive
Coating ability and water resistance Coating dry aggregate Coating after spraying Coating,wet aggregate Coating after spraying	- - - -	- - - -	Good Fair Fair Fair	- - - -	- - - -
Stability to mixing with cement (percentage coagulation) Max.	-	-	-	2	2
Miscibility with water	No coagulation	No coagulation	No coagulation	-	No coagulation
Tests on residue : Residue by evaporation percent Min. Penetration 25^oC/100g/5sec/ 1/10 mm. Ductility 25^oC/cm Min. Solubility in trichloroethylene Min.%	60 80-150 50 98	67 801-150 50 98	65 60-150 50 98	50 60-350 50 98	60 60-120 50 98
Distillation percent,by volume at: 190^oC 225^oC 260^oC 315^oC	- - - -	- - - -	- - - -	20-55 30-75 40-90 60-100	- - - -
Water content, percent by mass, Max	-	-	-	20	-

Guideline For Selection Of Emulsion Type

Application	Rapid Setting	Medium Setting	Slow Setting
Penetration Macadam	-	√	-
Prime Coat	-	√	√
Tack Coat	√	-	-
Slurry Seal	-	√	√
Fog Seal	-		√
Soil Stabilisation	-	√	√
Surface Dressing	√	-	-
Dust Binding	-	-	√
Crack Filler	-	-	√
Cold Mix	-	√	√
Mulch Treatment	-	-	√