Listing ID #3061088
Company Information
Ask for more detail from the seller
Contact SupplierEPDM is a highly flexible, high temperature insulation material which is applicable in the fields of sanitary, solar and heating. It is black in colour and best suited for solar thermal and hot water insulation applications. EPDM is available in sheet and tube form. The standard thickness of sheets and tubes are 9mm, 13mm, 19mm, 25mm, 32mm, 38mm and 50mm. The sheets are 1 meter in width and the length of the tubes is 1.83 meter (6 Ft.) per piece. The tubes are available from an internal diameter of 6mm (1/4 inches) to 140mm (5-1/2 inches).
Benefits :
Applications :
Duct insulation, Chilled water piping, Roof insulation, Terminal insulation, Cold Storage applications, Clean room applications, Solar Plumbing, Raised floor insulation, Refrigerant piping.
Physical Properties | EPDM | Test Method | ||||||
---|---|---|---|---|---|---|---|---|
Cell structure | Closed cell | |||||||
Density lbs/ft3(g/cm3) | 40-80 kg./m3 | ASTMD 1667 | ||||||
Thermal conductivity | Mean Temp. | -4oF | 32oF | 7SoF | 90oF | 104oF | ASTMC17 | |
BTU. In/ft.3 hr.oF (W/mk) | (-20oC) | (0oC) | (24oC) | (32oC) | (40oC) | JISA1412 | ||
K-Value | 0.22 | 0.23 | 0.25 | 0.26 | 0.27 | DIN52613 | ||
0.032 | 0.034 | 0.037 | 0.038 | 0.039 | ||||
Service temperature |
-70oFto 257oF -57oC-+125oC |
EPDM becomes hard at -570, but can be used even at -2000 | ||||||
Water vapor permeability perm-in (g/Pa.s.m.) | >7000 | En 12086 | ||||||
Water Absorption (weight %) | 5 | STMD10560 | ||||||
Ozone Resistance | No Crack | ASTM D1149 | ||||||
Heat stability % Shrinkage) | ||||||||
2000F (930C) 7 days | 6 | ASTM C 534 | ||||||
Flammability & Smoke, Density | Class V 0 | UL-94 | ||||||
25/50 | STME 84 | |||||||
Self-Extinguishing | ASTM D 635 | |||||||
Class 5.3 | EMPA (Switzerland) | |||||||
Non-Flammable | IS K 6911 | |||||||
Pass | IMO | |||||||
UV. Weather Resistance | Good | - | ||||||
Corrosion of copper, stainless | Non Corrosive | DIN 1988 | ||||||
Nitrosamine Contents | Non detected | U.S. FDA | ||||||
Sound reduction (dL) | 27dB (20mm) | DIN 52218 | ||||||
Flexibility | Excellent | - |
Physical Properties | EPDM | Test Method | |||||
---|---|---|---|---|---|---|---|
Cell structure | Closed cell | ||||||
Density lbs/ft3(g/cm3) | 40-80 kg./m3 | ASTMD 1667 | |||||
Thermal conductivity | Mean Temp. | -4oF | 32oF | 7SoF | 90oF | 104oF | ASTMC17 |
BTU. In/ft.3 hr.oF (W/mk) | (-20oC) | (0oC) | (24oC) | (32oC) | (40oC) | JISA1412 | |
K-Value | 0.22 | 0.23 | 0.25 | 0.26 | 0.27 | DIN52613 | |
0.032 | 0.034 | 0.037 | 0.038 | 0.039 | |||
Service temperature |
-70oCto 257o -57oC-+125oC |
EPDM becomes hard at -57oC, but can be used even at -200oC | |||||
Water vapor permeability perm-in (g/Pa.s.m.) | >7000 | En 12086 | |||||
Water Absorption (weight %) | 5 | STMD10560 | |||||
Ozone Resistance | No Crack | ASTM D1149 | |||||
Heat stability % Shrinkage) | |||||||
200oF (93oC) 7 days | 6 | ASTM C 534 | |||||
Flammability & Smoke, Density | Class V 0 | UL-94 | |||||
25/50 | STME 84 | ||||||
Self-Extinguishing | ASTM D 635 | ||||||
Class 5.3 | EMPA (Switzerland) | ||||||
Non-Flammable | IS K 6911 | ||||||
Pass | IMO | ||||||
UV. Weather Resistance | Good | ||||||
Corrosion of copper, stainless | Non Corrosive | DIN 1988 | |||||
Nitrosamine Contents | Non detected | U.S. FDA | |||||
Sound reduction (dL) | 27dB (20mm) | DIN 52218 | |||||
Flexibility | Excellent |