Eurostrip Paint Remover

The company is one of the major Manufacturers and Suppliers of Eurostrip Paint Remover. The Eurostrip Paint Removers, offered by the company, are versatile and highly efficient removers that can be applied on the walls, wooden surfaces as well as any other surface that needs repainting. The company offers the best grade Eurostrip Paint Removers to the clients.

Scope :
Any paint film, when old, has an inherent tendency to develop cracks, blisters flaking and loss of gloss in case the finish is glossy. Before application of a fresh coat of paint, the old paint film has to be removed. The paint removal is generally carried out by sand papering the surface which is a messy job, resulting into lot of flying dust and deep scratch marks on the surface. And in spite of that the old paint film remains sticking in the nooks and corners of the surface. The best and the easiest way is to apply eurostrip, which removes all types of paints without leaving any scratch marks. It is essentially a compound, consisting of fast evaporating solvents, wax and penetrants. The wax covers the solvents while the penetrants get underneath the paint film. The old paint film either softens, as in the case of convertible coatings like N.C. Or chlorinated rubber or plastic emulsion paints while blisters are formed when the coating is non-convertible like enamels including stoving enamels, epoxies and P.U finishes. The softened or blistered paint can be easily wiped off using a spatula or even a rag pad.

Areas of Application : Any surface, steel wood or wall that needs repainting.

Surface Preparation : None

Directions for Use : Brush liberal quantity of eurostrip on the surface of old paint and wait for 10-15 minutes. The plastic emulsion and N.C. Paint films will soften. Remove them using spatula. Other paint films will blister and can be removed very easily. When many coats of old paint are to be removed, eurostrip has to be applied twice or thrice.

Notes : Eurostrip containers develop pressure because of very fast evaporating solvents. Therefore, the containers must be opened carefully, with eyes away from the lid. Avoid skin contact to prevent irritation. In case of any splash on the skin, wash immediately with water.