An Evaporative Water Cooling System offers effective cooling by combining water evaporation, which is a natural process, with a reliable and simple air-moving system. In an Evaporative Water Cooling System, air from the outside is pulled via moist pads, where evaporation cools it and is circulated in a building or a house with the help of a large blower. During this process, the temperature of the air in the outside gets reduced as much as thirty degrees. We make Evaporative Water Cooling System available at highly affordable prices. Features

• Compared to the conventional systems, the fill type system attains maximum saturation.
• The design is compact and pre-fabricated, consumes less space, which is only about forty percent of that occupied by conventional systems.
• There is no requirement for masonry work and can be placed outside the building too.
• Consumption of power is negligible when compared to spray machines. This is due to low drop in pressure and low pump.
• The level of maintenance is also negligible since no nozzle is used. This promises trouble-free service.
• Since there are no nozzles of high pressure, the noise level is only about eighty decibel near the machines.
• Quick installation ensured as the machine is fabricated and tested at factory and possesses the flexibility for relocation.
• The equipment is available in FRP casings or stainless steel.
• The content material at the surface is specially engineered for the purpose of direct evaporative cooling & humidification. It is constructed from a unique cellulose paper that comes impregnated with compounds that are insoluble and prevent rotting. It also contains wetting agents and stiffening saturates. The material is made out of corrugated sheet that is assembled in pads that are self-supporting.
• There is an arrangement of patented angle on the sheets in order to direct the flow of water towards the side of the air inlet, the place of occurrence of maximum evaporation.
• The pad is also constructed to flush away the dust from the atmosphere and has a contact surface of about 440 m2/m3 between water and air
• The cover of water distribution is of fiber glass reinforced plastic for its anti-corrosive properties. The metal parts are of sixteen gauge steel sheet that is galvanized.
• The water tank is of 3 mm FRP that is of reinforced steel.

An Evaporative Water Cooling System offers effective cooling by combining water evaporation, which is a natural process, with a reliable and simple air-moving system. In an Evaporative Water Cooling System, air from the outside is pulled via moist pads, where evaporation cools it and is circulated in a building or a house with the help of a large blower. During this process, the temperature of the air in the outside gets reduced as much as thirty degrees. We make Evaporative Water Cooling System available at highly affordable prices. Features

• Compared to the conventional systems, the fill type system attains maximum saturation.
• The design is compact and pre-fabricated, consumes less space, which is only about forty percent of that occupied by conventional systems.
• There is no requirement for masonry work and can be placed outside the building too.
• Consumption of power is negligible when compared to spray machines. This is due to low drop in pressure and low pump.
• The level of maintenance is also negligible since no nozzle is used. This promises trouble-free service.
• Since there are no nozzles of high pressure, the noise level is only about eighty decibel near the machines.
• Quick installation ensured as the machine is fabricated and tested at factory and possesses the flexibility for relocation.
• The equipment is available in FRP casings or stainless steel.
• The content material at the surface is specially engineered for the purpose of direct evaporative cooling & humidification. It is constructed from a unique cellulose paper that comes impregnated with compounds that are insoluble and prevent rotting. It also contains wetting agents and stiffening saturates. The material is made out of corrugated sheet that is assembled in pads that are self-supporting.
• There is an arrangement of patented angle on the sheets in order to direct the flow of water towards the side of the air inlet, the place of occurrence of maximum evaporation.
• The pad is also constructed to flush away the dust from the atmosphere and has a contact surface of about 440 m2/m3 between water and air
• The cover of water distribution is of fiber glass reinforced plastic for its anti-corrosive properties. The metal parts are of sixteen gauge steel sheet that is galvanized.
• The water tank is of 3 mm FRP that is of reinforced steel.