FIBERGLASS ELECTRICAL SLEEVING

FIBERGLASS ELECTRICAL SLEEVING
Coated braided fiberglass sleeving for Insulation Class B (130°C), Class F (155°C) and Class H (200°C) that meet electrical, as well as thermal and mechanical requirements. We also offer uncoated and resin saturated high temperature, fray-resistant, braided and knitted fiberglass sleeving for Insulation Class C (over 240°C).
SILICONE COATED FIBERGLASS
Custom formulated silicone rubber extruded over electrical grade fiberglass sleeving. Extremely flexible, resistant to temperature extremes with excellent push back and good cut through resistance.
Class H (200°C) insulating material.
Coated with high abrasion resistant silicone rubber
-70°C to 240°C operating temperature range.
Standard colors are white, black and natural. Other colors available upon request.
Grade A up to 8 kV
Grade B up to 4 kV
MIL-I-3190E,
UL CSA
RoHS compliant
ACRYLIC COATED FIBERGLASS
Acrylic resin coated fiberglass sleeving. Highly flexible, resists mechanical damage, compatible with most wire enamels and varnishes. Excellent thermal endurance, high push back, and non-blocking.
Class F (155°C) insulating sleeving
Excellent electrical, chemical and oil resistance properties
High heat stability and flexibility
Sizes range from #24 to 2”
Continuous operating temperature to 155°C
Standard colors are black, yellow and natural. Other colors available upon request
Meets MIL-I-3190F, ULCSA
Grade A 7000 v. min. avg
Grade B 4000 v. min. avg
Grade C-1 2500 v. min. avg
Grade C-2 1500 v. min. avg
Grade C-3 NA
RoHS compliant
VINYL COATED FIBERGLASS
Tough vinyl coating bonded to electrical grade braided fiberglass sleeving. Combines extreme flexibility with excellent abrasion and cut through resistance.
Class B (130°C) insulating sleeve
Sizes range from #24 to 1-12”
-20°C to 130°C operating temperature range
Standard color is black. Other colors available upon request
Grade A 7 kV
Grade B 4 kV
Grade C-1 2.5 kV
MIL-I-22157 and MIL-I-3190E
UL CSA
RoHS compliant
ACRYLIC SATURATED FIBERGLASS
Acrylic resin saturant applied to a heat treated (annealed) electrical grade braided sleeving to provide body and firmness. A very flexible, non-fraying, flame resistant sleeving available in standard wall and heavy wall.
Capable of short term performance to 650°.
Non-fraying and flexible
Sizes range from #24 to 1”
240°C to 650°C operating temperature range (colors may fade or bake at 400°C)
Insulation Class C
Standard colors are natural and black
Other colors available upon request
UL and VW-1
RoHS compliant
HEAT TREATED (ANNEALED) FIBERGLASS
Braided glass sleeving heat treated (annealed) to remove textile sizing and provide resistance to fraying when cut. Available in standard wall and heavy wall.
Sizes range from #24 to 1”
240°C to 650°C operating temperature range
Insulation Class C
Standard color is natural
Other colors available upon request
UL and VW-1
RoHS compliant
BRAIDED BASALT SLEEVING (THERMOJACKET® E)
Knitted basalt sleeve with excellent resistance to high temperatures, good thermal containment performance, outstanding electrical insulation and chemical corrosion resistance. Excellent for use in combustion engine exhaust systems.
650°C max operating temperature range
750°C peak temperature
Sizes range from 2” to 5 ½”
Low profile
Extremely flexible
Conforms to component
RoHS compliant
More Extruded Tubing & Sleeving
Technical specifications subject to change without notice.