FL 106 Battery Operated Turbine Flow Meter

FL-106 Battery Operated Turbine Flow TransmitterElectronet Series – Battery Powered Turbine Flow MeterFeatures

• Remote Display Option Available

• Simple & Cost-Effective Construction

• LCD Display for Flow Rate & Total Flow

• Suitable for Conductive and Non-Conductive Liquids

• Long Battery Life (2 to 10 Years)

• Durable & Versatile

• Maintenance-Free Operation

• Electronics Protection:

  • Weatherproof IP67

  • Flameproof (CMRI IIA & IIB Certified)

Electronet series FL-106 are battery-operated turbine flow transmitters designed for industrial liquid flow measurement.
The flowing media rotates a vaned rotor at an angular velocity proportional to the flow rate. The pick-up coil senses this rotation and converts it into a pulsating electrical signal.

The summation of these pulses corresponds to the total flow, and the pulse frequency is proportional to the instantaneous flow rate.
The device features a long-life battery, LCD display, and optional remote electronics for flexible installation.

• Media: Clear Liquids

• Line Size: 15 NB to 200 NB

• Electronics: Integral (Local) / Remote

• Viscosity: Up to 100 cP

• Calibration Range: Factory Calibrated (As per requirement)

• Accuracy: ±0.5% of Reading + 5 mm/sec (Velocity range: 0.3 m/s to 6 or 12 m/s)

• Linearity: < ±0.25% of Reading

• Repeatability: ±0.25% of Reading

• Turn Down Ratio: 10:1

• Pressure Drop: Approx. 0.28 kg/cm² @ maximum flow

• Process Pressure: 0 to 10 kg/cm²

• Process Temperature: -20°C to 120°C

• LCD Display

  • 4-digit Flow Rate

  • 8-digit Totalized Flow

• Toggle key for switching between Flow Rate & Total Flow

• Power Supply: Battery Operated (2 × 3.6V DC)

• Battery Life: 2–10 Years (Depends on sampling time)

• Power Consumption: < 40 mW

• Response Time: < 500 mSec

• Remote Electronics Cable: Up to 15 meters

• Protection Class:

  • Weatherproof IP67

  • Flameproof CMRI IIA/IIB Certified

1. Bearings: Tungsten Carbide Sleeve / V-Jewel

2. Rotor: SS410 / 17-4 PH

3. Shaft: Tungsten Carbide

4. Body / Support / Flange: Stainless Steel

1. Flanged: ASA 150 RF (Up to 200 NB)

2. Threaded: Up to 50 NB

3. Tri-Clover: Up to 100 NB

4. SMS Union: 25 to 100 NB

• In-Line Installation (Horizontal or Vertical)

• Temperature: -20°C to 120°C

• Humidity: 5% to 95% RH (Non-Condensing)