Floating Diffuser

We offer a wide range of sewage water diffuser. These are utilized in sewage treatmentetp. Float diffusers are made use in more stp and etp.the system consists of 2 number of imported taiwan make plastic floats, ss frame and aerotube gridgrids. We can use grids with any number of aerotubes according to our requirement. Each meter aerotube will give 5 m3 air. The system can be put on the top of effluent. Braided oze can be used from the blower to the grid. There is no need to spend for separate plumbing, construction of structures, design charges etc. The float system size is 1 meter x 1.5 meter. It is compact and will fit into even a small tank. Multiples of floats can be used in larger tanks. The blower can be kept at the bank of the tank or even on the frame it can be mounted. The bod and cod levels are maintained as required. The cost to get 100 m3 or 130 m3 of air is very much low and economical.the cost will come only half of the cost of common diffusers. The workers need not touch the effluent on repair or replacement of the system. The tank need not be emptied while working. More over the float can be bought to any corner of the tank with nylon ropes.(image a float in a leather affluent). Float diffuser specially designed for etpstp.
features:
can increase air flow in the same system just by increasing no of aerotubes
low cost mechanism
superior mixing capabilities
reduced energy consumption can result in up to 50% electrical savings.
no need for separate plumbing or civil work
no hidden cost of designing charges
high oxygen transfer
specifications:
type of aero tube
microporous tube
size
od 25.4 mm; id 12.6 mm;
moc of aero tube
car tyre rubber and pe
moc of aero tube clamps
ss304
moc of nipple
pvc
operating temperature of aero tube
70
effective area of aerotube
0.078 m2
area of influence zone
1 m2
optimum through put
5 cubic meters per hour per meter tubing
minimum through put
0.5 cubic meters per hour per meter tubing
maximum through put
8.5 cubic meters per hour per meter tubing
maximum allowable pressure
5 kgcm2
make
colorite plastic usa
standard oxygen transfer rate
4.2 kg o2.