Fully Automatic M300 Moulding Line Unit

MaterialMild Steel Tubes, Painted,Well Insulated Doors, SS 304 In Cooling Chamber,Painted MS, SS 304 Inner Contact Part,Aluminum Head
PurityAutomatic Demoulding System,Mould Pre-heater,Vibration Section,Multi-Tier Cooler With Emerson Make Chiller Unit,Hot Water System For Depositor,All Pneumatic Cylinders Are Branded (Festo/SMC)
Power Supply415 Volts, 3 Phase Main Motor 2.2kw And 0.37 Kw
Number Of FlowerMoulding Line Unit
Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

Company Information

4.4/5

(29)

Ask for more detail from the seller

Report incorrect details

PurityAutomatic Demoulding System,Mould Pre-heater,Vibration Section,Multi-Tier Cooler With Emerson Make Chiller Unit,Hot Water System For Depositor,All Pneumatic Cylinders Are Branded (Festo/SMC)
Power Supply415 Volts, 3 Phase Main Motor 2.2kw And 0.37 Kw
Number Of FlowerMoulding Line Unit
MaterialMild Steel Tubes, Painted,Well Insulated Doors, SS 304 In Cooling Chamber,Painted MS, SS 304 Inner Contact Part,Aluminum Head
Mould Size300 X 225 X 30mm
Cooling Tunnel Temperature4°C To 6°C
Mould Capacity300 Moulds Supplied, 220 Approx Moulds To Fill Plant
Cooling Time18.4 Minutes At 15 Moulds/minute
Overall Length14.5 Meters
Speed12 To 15 Moulds/minute

Fully Automatic M300 Specifications:

Plant Build with heavy duty Duly painted Mild Steel Tubes.
Well insulated Doors.
Inner partitions of cooling chamber, where the product may have chance to contact are made with SS 304 filled with insulation.
300 moulds will be supplied with the Mould size: 300 x 225 x 30mm
Speed up to 12 to 15 moulds/minute
Automatic Demoulding system.
Mould Pre-heater
Vibration Section
Depositor: Depositor tank build with painted MS and Inner (Contact part) SS 304, Aluminum head with total 20 no’s of pistons.
Supplied one set of Nozzle plate.
Multi-Tier Cooler with 10.0 Hp Emerson make Chiller Unit for Cooling Tunnel temp around 4˚C to 6˚C.
Hot Water System for Depositor
220 approx moulds to fill plant
Cooling Time: 18.4 minutes at 15 moulds/minute
14.5 meters overall length
Power Supply: 415 volts, 3 phase Main motor 2.2kw and 0.37 kw.
All pneumatic cylinders are branded (Festo/SMC).