We provide Galvanised Steel Pipes which are manufactured from edge trimmed Mild Steel Strips Slitted from Hot Rolled low Carbon Steel Coil conforming to IS: 10748-1995. These edge trimmed strips are mechanically formed into required circular shape and high frequency electricity, i.e., 4,50,000 cycles/second is then used to fuse the pipe together to from a weld joint thus become homogeneous part of the completed tube. The tubes then passes through the sizing section where dimensional tolerance if any are corrected, where after they are cut to length and ends beveled before hydrostatic testing.
Thereafter they are sent for protective surface finishing operation such as Hot Dipped Galvanising or Varnishing as per specific requirements. The tubes are offered beveled, plain ended or threaded with screwed & socketed.

Applications & Specifications

• Water, Gas & Sewage pipes
• Structural Purposes
• Idlers / Conveyors
• Water wells (casing pipes)
• Electric Poles
• Automotive Purposes
• Scaffolds
• Air, Steam, Oil & Gas transmission

Size Range

• Round tubes up to and including 300 mm NB
• OD sizes from 12.7 mm to 101 mm
• Square hollow sections - 15X15 to 72X72
• Rectangular hollow sections - 50X25 to 96X48

Thickness

• Min 1.60 mm to 8.0 mm Max

Length

• Upto 9mtrs

We provide Galvanised Steel Pipes which are manufactured from edge trimmed Mild Steel Strips Slitted from Hot Rolled low Carbon Steel Coil conforming to IS: 10748-1995. These edge trimmed strips are mechanically formed into required circular shape and high frequency electricity, i.e., 4,50,000 cycles/second is then used to fuse the pipe together to from a weld joint thus become homogeneous part of the completed tube. The tubes then passes through the sizing section where dimensional tolerance if any are corrected, where after they are cut to length and ends beveled before hydrostatic testing.
Thereafter they are sent for protective surface finishing operation such as Hot Dipped Galvanising or Varnishing as per specific requirements. The tubes are offered beveled, plain ended or threaded with screwed & socketed.

Applications & Specifications

• Water, Gas & Sewage pipes
• Structural Purposes
• Idlers / Conveyors
• Water wells (casing pipes)
• Electric Poles
• Automotive Purposes
• Scaffolds
• Air, Steam, Oil & Gas transmission

Size Range

• Round tubes up to and including 300 mm NB
• OD sizes from 12.7 mm to 101 mm
• Square hollow sections - 15X15 to 72X72
• Rectangular hollow sections - 50X25 to 96X48

Thickness

• Min 1.60 mm to 8.0 mm Max

Length

• Upto 9mtrs