Company Information
Member Since 8 Years
Nature of Business RetailerAsk for more detail from the seller
Contact Supplier
We are providing a wide range of Gate Valve such as Rising Stem, Bolted Bonnet, OS & Y Type Jacketed Gate Valve with Flexible Wedge Gate and Seat Rings seal-welded or integral design. Flanged End Gate Valve, Screwed Gate Valve, Butt Weld End Gate Valve, Socket Weld End Valve, our Valves are used widely in a host of Industries. These dimensionally accurate Gate Valve are available at the industry leading prices.
The Gate Valve’s Body and bonnet – Cast with uniform sections, precision machined. Body: Straight through port without recesses except in the seat area – Minimum resistance to flow, turbulence and erosion. Flex wedge: Guide slots in the wedge engage with integral guide ribs in the body, Stem-to- wedge contact close to wedge centre – Better sealing, smoother operation. Seal-welded Seat Ring – Eliminates leakage path between seat ring and body, does not loosen up due to temperature fluctuations or vibration. Stem – One-piece construction with forged T-head – Long service life, smoother operation.
Designed for high pressure and high temperature applications, for a wide range of fluids except slurries and viscous fluids. These valves are generally used in the wide open or closed position, are not recommended for throttling service because throttling causes disc chattering and vibration which is likely to erode the seating surface and cause leakage. The range comprises valves for cryogenic services, NACE Specifications (MR-01- 75), Position Indicator, Drain plug & Bypass Arrangement.
Â
There are mainly two types of gate Valves – the Rising Stem Gate Valve and Non-Rising Stem Gate Valve. Rising stem gate valves have the threads external to the valve body. You can see the valve stem is moving up when the valve is opening. In this way, you can visually keep track of how far the valve is open.
Non-rising stem gate valves have threads that lift the gate are exposed to the fluid being controlled by the valve. This can cause problems if the fluid tends to foul the threads, so non-rising stem valves are usually used on only clean liquids and gases.
Â
Jacketed Gate Valve largely use to sustain process media temperature during process to keep fluids at a lower viscosity to operate valve smoothly. Each Full Jacketed Gate Valve body construction replace by adding minimum one size higher flanges to achieve proper tighten space of bolt and nut.
Steam and Hot Oil Jacketed Gate Valves mostly use in application of Polymer, Bitumen, Liquid Asphalt, Coal tar, Lactam, Highly Viscous Media, Molten Sulphur or Sulphur. All Jacketed Gate Valves have standard Inlet & Outlet connection for Steam or Hot Oil circulation. Jacket connection can be Threaded (BSP / NPT Female) or Flanged End.
Connect with us
For Buyer 
For Seller 
Help 
Kathwada, Ahmedabad, Gujarat 
Send Enquiry