Globe Valves

Globe valves are most commonly used where throttling or both throttling and shut-off are required. Because of high pressure drop in globe valves, on-off service usage is usually confined to the applications where the valve is normally closed and the pressure drop is not important when the valve is open. The flow control element – the disc – of the globe valve moves along the axis of media flow path and it is always in the fluid path. Because the globe valve is design for both throttling and shut-off, they should not be used for prolonged periods of throttling at less than 10% open, Internal damage can occur.
Features :

• Outside Screw & Yoke (OS&Y) – Rising Stem Type.
• Rising Hand Wheel Type – Non Rising Stem Type.
• Male Screw – union – Screw in and Bolted Bonnet.
• Flanges to ANSI B16.5 and BS1560 Raise Face.
• Valves Design and Shell Thickness with accordance to ANSI B16.34 & WOG.
• Face to Face in Accordance with ANSI B 16.10
• Removable Body Seat and Removable Soft Seat.
• Drain Plug Option.
• Live Loaded Glands Option.
• Regulating Trim Option as per Customers’ requirement for throttling Services.
• Screw Down – Globe Check Valve Option.
• Y-Type and Angle Pattern Type also available.
• BELLOW SEAL for Nuclear Power Generation – Pressure seal Type.
• Automatic Temperature Control Steam Globe Valve Type.
• Available different types of end configurations like… Flange Connections of all
• types and ratings, Socket Weld Ends, Butt weld Ends, Female Screw Ends,
• Male Screwed Ends, Sanitary Ends, etc.
• Globe valves come in variety of body – bonnet and trim materials as per the
• Customers’ application.
• Available Numerous type of body bonnet joints for specific needs like..bolted
• bonnet, welded, threaded and union bonnets based on the pressure allowances
• of the valve itself.
• We can accommodate customers’ need like… Trim change, end configuration
• changed, operating system change, hand wheel – bonnet extension for buried /
• unburied services, cryogenic columns and many more options.

Specifications :

• Globe valves inspection and testing according to API 598 / BS EN 12266-1.
• Complies with API 600, BS 1873.
• General Valve Design according to API 602, ASME B16.34, MSS SP85 –
• MSS SP80/BS5154, BS 1873.
• Wall thickness according to API 602.
• End to End Dimension according to ASME B16.10.
• Flange Design according to ASME B16.5
• Thread Design according to ASME B 1.20.1.
• Butt Weld Design according to ASME B 16.25
• Socket weld Design according to ASME B 16.11
• Pressure – Temperature Rating according to ASME B16.34
• Globe Valve Trims according to API 600.
• Standard Stem Screw is ANSI B1.5 type ACME thread burnished finished.
• Qualities of Globe Valve Packing meet requirement of 1990 Clean Air Act amendment.