We offer gps vehicle tracker.
user manual
preface
thank you for purchasing our products. This deliberately edited manual is to introduce the tracker with the complete technical data and the instructions showing how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Most problems could be solved through the explanations and the troubleshooting tips. Once you finish reading it, keep it handy for necessary reference. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
content
ⅰ. Preface…………………………………………. 1
ⅱ. Attentions………………………………………. 2
ⅲ hardware description….…………………….… 3
ⅳ. Main function……………………………….…. 3
ⅴ. Set up………………………………………..….. 4
ⅵ. Installation diagram………………………...….. 7
ⅶ. Installation……………………………….….…... 7
ⅷ. Application…………………………………….… 9
ⅸ.specification………………………………....……9
ⅹ.guarantee…………………………………………10
attention
1. Make sure to read this manual carefully before using this product.
2. Please insert the sim card before installing, and make sure the sim card has no password, otherwise the tracker will not work normally.
3. Please make sure that all the cables of the tracker has been connected rightly, and then connect the tracker to host power. Must not install or take down the tracker when it is power on. If you found any troubles or omissions about the connections of cables, please cut off power first, otherwise you will easily damage the tracker.
4. The tracker works in wireless communications, so please cut off the host power before your vehicles entering fuel depot and dangerous material place.
5. The tracker’s work voltage is 10v-36v. Please use the tracker in the scope of work voltage.
6. The host of gps tracker is a low-power wireless transmitter and receiver. It receives and sends radio frequency signal when it is working.
7. To avoid electromagnetic interference or uncompatible configuration, please stop using your tracker in the noticed place.
gps vehicle tracker
◆hardware description
1. host tracker
2. Start up
the indicator in the device can turn into red and blue color. Insert the sim card and install the tracker in the car, the red indicator is on. In 10 seconds, the device will begin to work and search the gsm signals as well as the gps signals. When the device is communicating, the red indicator blinks very fast. The blue indicator will keep flashing every 2 seconds when the gps module is in standby mode. When the blue indicator is not lighting, the gps module is working but hasn’t fixed position, after it has fixed position, the blue indicator is lighting.
◆main functions
1. Positioning and tracking: through the on-line positioning platform or the cell phone to locates at times, and get the working status. You can choose the positioning platform by yourself.
2. Triggering emergency alarm: when there is a emergency happened on the vehicle, you can put on the button and the installed device will send out alarm to the authorized numbers.
3. Remote controlling oil and circuit: you can control the oil and circuit via the device by sms in anywhere and anytime.
4. Remote monitoring: in anywhere and anytime, call the phone number in the device, when it connects, you can monitor the sound around 5 meters.
5. Movement alert: send sms to the device to start the movement alert function. When the vehicle is moving, the device will send the movement alert to all authorized numbers.
6. Overspeed alert: send sms to the device to start the movement alert function. When the vehicle is overspeed, the device will send the overspeed alert to all authorized numbers.
7. Geo-fence: set up a geo-fence for the device to restrict its movements within a district. The device will send the message to all authorized numbers when it breaches the district.
8. Restart the device: send sms to resume the default of device.
9. Auto track: you can set up auto track by sms or on-line positioning platform.
10. Mileage statistics; acc checking; cutting off power and alarm.
11. Compatible with the original anti-theft alarm: it will send sms alarm after the original anti-theft alarm warning.
12. Work with original car alarm.
﹡modify the ip and port of communication protocol for different on-line positioning platform
13. When tracker cut off power, tracker sends alert sms to user.
◆installation diagram of the tracke
◆gps vehicle tracker installation
esv-518 tracker should be installed by technical professional of local service centre. Without permission, the user cann’t repair and move the tracker randomly. If users do, any unfortunated damage should be compensated by himself.
installation steps (caution: the following installation should under no power, otherwise will be dangerous)
◆gps vehicle tracker installation
esv-518 tracker should be installed by technical professional of local service centre. Without permission, the user can’t repair and move the tracker randomly. If users do, any unfortunated damage should be compensated by himself.
installation steps (caution: the following installation should under no power. Otherwise will be dangerous)
1.power supply line: the red wire connects 12v“+”;black wire connects to 12v“-”
2. Wire for cutting off oil of the tracker
yellow wire connects the relay pin 86; 85 pin connect to 12 v dc , 87 pin and 30 pin in series power supply circuits. Caution: wrong connection of yellow wire will damage the tracker.
3. Wire for cutting off circuit of the tracker
white wire connects relay pin 86; 85 pin to 12 v dc, 87 pin and 30 pin are in series power supply circuits. Caution: wrong connection of yellow wire will damage the tracker.
4. Emergency triggering alarm
the blue wire connects the positive of the alarm button, and the black wire connects the negative of the alarm button.
◆application
1. global positioning
2. real-time monitoring
3. vehicle locating
4. timing tracking
5. cutting off power and circuit by remote control
6. vehicle rental / fleet management etc.

We offer gps vehicle tracker.
user manual
preface
thank you for purchasing our products. This deliberately edited manual is to introduce the tracker with the complete technical data and the instructions showing how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Most problems could be solved through the explanations and the troubleshooting tips. Once you finish reading it, keep it handy for necessary reference. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
content
ⅰ. Preface…………………………………………. 1
ⅱ. Attentions………………………………………. 2
ⅲ hardware description….…………………….… 3
ⅳ. Main function……………………………….…. 3
ⅴ. Set up………………………………………..….. 4
ⅵ. Installation diagram………………………...….. 7
ⅶ. Installation……………………………….….…... 7
ⅷ. Application…………………………………….… 9
ⅸ.specification………………………………....……9
ⅹ.guarantee…………………………………………10
attention
1. Make sure to read this manual carefully before using this product.
2. Please insert the sim card before installing, and make sure the sim card has no password, otherwise the tracker will not work normally.
3. Please make sure that all the cables of the tracker has been connected rightly, and then connect the tracker to host power. Must not install or take down the tracker when it is power on. If you found any troubles or omissions about the connections of cables, please cut off power first, otherwise you will easily damage the tracker.
4. The tracker works in wireless communications, so please cut off the host power before your vehicles entering fuel depot and dangerous material place.
5. The tracker’s work voltage is 10v-36v. Please use the tracker in the scope of work voltage.
6. The host of gps tracker is a low-power wireless transmitter and receiver. It receives and sends radio frequency signal when it is working.
7. To avoid electromagnetic interference or uncompatible configuration, please stop using your tracker in the noticed place.
gps vehicle tracker
◆hardware description
1. host tracker
2. Start up
the indicator in the device can turn into red and blue color. Insert the sim card and install the tracker in the car, the red indicator is on. In 10 seconds, the device will begin to work and search the gsm signals as well as the gps signals. When the device is communicating, the red indicator blinks very fast. The blue indicator will keep flashing every 2 seconds when the gps module is in standby mode. When the blue indicator is not lighting, the gps module is working but hasn’t fixed position, after it has fixed position, the blue indicator is lighting.
◆main functions
1. Positioning and tracking: through the on-line positioning platform or the cell phone to locates at times, and get the working status. You can choose the positioning platform by yourself.
2. Triggering emergency alarm: when there is a emergency happened on the vehicle, you can put on the button and the installed device will send out alarm to the authorized numbers.
3. Remote controlling oil and circuit: you can control the oil and circuit via the device by sms in anywhere and anytime.
4. Remote monitoring: in anywhere and anytime, call the phone number in the device, when it connects, you can monitor the sound around 5 meters.
5. Movement alert: send sms to the device to start the movement alert function. When the vehicle is moving, the device will send the movement alert to all authorized numbers.
6. Overspeed alert: send sms to the device to start the movement alert function. When the vehicle is overspeed, the device will send the overspeed alert to all authorized numbers.
7. Geo-fence: set up a geo-fence for the device to restrict its movements within a district. The device will send the message to all authorized numbers when it breaches the district.
8. Restart the device: send sms to resume the default of device.
9. Auto track: you can set up auto track by sms or on-line positioning platform.
10. Mileage statistics; acc checking; cutting off power and alarm.
11. Compatible with the original anti-theft alarm: it will send sms alarm after the original anti-theft alarm warning.
12. Work with original car alarm.
﹡modify the ip and port of communication protocol for different on-line positioning platform
13. When tracker cut off power, tracker sends alert sms to user.
◆installation diagram of the tracke
◆gps vehicle tracker installation
esv-518 tracker should be installed by technical professional of local service centre. Without permission, the user cann’t repair and move the tracker randomly. If users do, any unfortunated damage should be compensated by himself.
installation steps (caution: the following installation should under no power, otherwise will be dangerous)
◆gps vehicle tracker installation
esv-518 tracker should be installed by technical professional of local service centre. Without permission, the user can’t repair and move the tracker randomly. If users do, any unfortunated damage should be compensated by himself.
installation steps (caution: the following installation should under no power. Otherwise will be dangerous)
1.power supply line: the red wire connects 12v“+”;black wire connects to 12v“-”
2. Wire for cutting off oil of the tracker
yellow wire connects the relay pin 86; 85 pin connect to 12 v dc , 87 pin and 30 pin in series power supply circuits. Caution: wrong connection of yellow wire will damage the tracker.
3. Wire for cutting off circuit of the tracker
white wire connects relay pin 86; 85 pin to 12 v dc, 87 pin and 30 pin are in series power supply circuits. Caution: wrong connection of yellow wire will damage the tracker.
4. Emergency triggering alarm
the blue wire connects the positive of the alarm button, and the black wire connects the negative of the alarm button.
◆application
1. global positioning
2. real-time monitoring
3. vehicle locating
4. timing tracking
5. cutting off power and circuit by remote control
6. vehicle rental / fleet management etc.