S. M. Industrial House proudly presents itself as a trusted Manufacturer of Graphite Sheets.

Construction
Graphite Sheets are made from exfoliated graphite flake which is compressed into foil by a carefully controlled calendering process. In this process, the expanded flake particles are mechanically locked together without the use of fibers, binders or other additives. Sheets of foil are then laminated to the required thickness.

Applications
The sheet has pressure-temperature sealability capabilities that are far superior to all asbestos reinforced and non-attack by virtually all organic and inorganic fluids with the exception of concentrated, highly oxidizing acids.
Gaskets cut from flexible graphite sheet seal with low to moderate bolt loads and because of very low creep relaxation, re-torquing is rarely required. Flexible graphite conforms to irregular flange sealing surfaces and readily flows into flange irregularities enabling it to seal both smooth and coarse surface finishes.

Technical Specifications

Item		Unit	Value
Temperature	Minimum	o C	-200
	Maximum		450 (In Air)
			650 (In Steam)
			3000 (In Inert Media)
Pressure		Bar	150
Physical Properties	Compressibility	%	> 40
	Recovery	%	> 15
	Creep Relaxation	%	5
	Tensile Strength	Mpa	> 4.5
	Compressive	Mpa	> 150

S. M. Industrial House proudly presents itself as a trusted Manufacturer of Graphite Sheets.

Construction
Graphite Sheets are made from exfoliated graphite flake which is compressed into foil by a carefully controlled calendering process. In this process, the expanded flake particles are mechanically locked together without the use of fibers, binders or other additives. Sheets of foil are then laminated to the required thickness.

Applications
The sheet has pressure-temperature sealability capabilities that are far superior to all asbestos reinforced and non-attack by virtually all organic and inorganic fluids with the exception of concentrated, highly oxidizing acids.
Gaskets cut from flexible graphite sheet seal with low to moderate bolt loads and because of very low creep relaxation, re-torquing is rarely required. Flexible graphite conforms to irregular flange sealing surfaces and readily flows into flange irregularities enabling it to seal both smooth and coarse surface finishes.

Technical Specifications

Item		Unit	Value
Temperature	Minimum	o C	-200
	Maximum		450 (In Air)
			650 (In Steam)
			3000 (In Inert Media)
Pressure		Bar	150
Physical Properties	Compressibility	%	> 40
	Recovery	%	> 15
	Creep Relaxation	%	5
	Tensile Strength	Mpa	> 4.5
	Compressive	Mpa	> 150