Insertion Electromagnetic Flow Transmitter, For Conductive Liquids., Feature : Easy To Use, Proper Working

insertion electromagnetic flow transmitter

series ief insertion electromagnetic flow transmitter

field configurable, high accuracy, bacnet or modbus® protocol

a-ief remote display is now available!

the series ief insertion electromagnetic flow transmitter is an adjustable insertion flowmeter featuring electromagnetic technology that accurately and reliably measures fluid velocity in addition to providing several continuous signal outputs. This series is specifically designed to offer superior performance paired with simple installation and use. One unit is adjustable to fit pipe sizes from 4 to 36" (101.6 to 914.4 mm), and offers several output options including selectable bacnet ms/tp or modbus® rtu communications protocol over 2-wire rs-485 in addition to the standard analog, frequency and alarm outputs.

dwyer instruments, inc. Was recognized for excellence in product design in the 15th annual dealer design awards program sponsored by the air conditioning heating & refrigeration news magazine. An independent panel of contractors acted as judges in the contest that had 98 entries. The company’s insertion electromagnetic flow transmitter was the bronze award winner in the testing and monitoring product category. The achr news is the leading trade magazine in the heating, ventilating, air conditioning, and refrigeration industries. To read the full announcements, please visit https://www.dwyer-inst.com/2018ddabronzewinner.

specifications

• service:compatible clean or dirty non coating, conductive liquids.
• range:0 to 20 ft/s (0 to 6 m/s).
• wetted materials:body shaft/fitting: 316ss; electrodes: 316ss; electrode cap: polymer/polystyrene; o-ring: silicon.
• accuracy:high accuracy units: ±0.5% of reading at calibrated velocity; ±1% of reading from 2 to 20 ft/s (0.6 to 6 m/s); ±0.02 ft/s (±0.006 m/s) at < 2 ft/s (0.6 m/s);
• standard accuracy units: ±1% fs.
• temperature limits:ambient: -20 to 160°f (-29 to 71°c); process: 15 to 250°f (-9 to 121°c); storage: -40 to 185°f (-40 to 85°c).
• process connection:1" npt or bspt with accessory full port ball valve options.
• pressure limits:400 psi (27.6 bar) @ 100º f (37.8°c).
• pressure drop:< 0.1 psi at 12 ft/s in 4" (101.6 mm) and larger pipe.
• outputs:(1) analog: 4 to 20 ma, 0 to 5 v, 0 to 10 v or 2 to 10 v (display selectable);
• (1) pulse/frequency: 0 to 15 v peak pulse, 0 to 500 hz or scalable pulse output (display selectable);
• (2) alarm: (1) empty pipe detection or minimum/maximum velocity, (display selectable);
• (1) reverse flow output indication.
• power requirements:12 to 42.4 vdc, .25 a @ 24 vdc; 12 to 36 vac.
• electrical connection:removable terminal blocks, model selectable 1/2" female npt conduit connection, pg 16 gland or pg 16 gland with (2) 10' (3 m) 9 conductor 22 awg plenum rated cables, accessory cable lengths up to 200' (61 m) optional.
• display:2" ( 5.08 cm) x 2" (5.08 cm) graphic lcd with backlight.
• conductivity:>20 microsiemens.
• enclosure material:powder coated die cast aluminum.
• enclosure ratings:nema 6p (ip68) (non display models); nema 4x (ip66) (-lcd option).
• agency approvals:btl, ce, nsf/ansi 61 and 372.
• communications (-com option)
• type:bacnet ms/tp or modbus® rtu communication protocol (default disabled, display selectable).
• supported baud rates:9600, 19200, 38400, 57600, 76800, or 115200 bps (display selectable).
• device load:1/8 unit load.