Listing ID #180598
Company Information
Ask for more detail from the seller
Contact Supplier
Jaswinder Guillotine Shearing Machines are of modern design, Sturdy and of robust construction in the design of which simplicity has been the key note. All machines are guaranteed to cut their rated capacity in Mild Steel for the full length and to stand up to continuous service at this capacity. The Side frames, Tables, Blade Beam and Hold down are of close grained Cast Iron designed to eliminate deflection and withstand continuous high speed performance at full capacity. The upper blade beam moves in guides on the side members. The hold down Beam is activated by the movement of the blade Beam and is adjusted for height by adjusting screws. Drive is by Vee Belts on to the flywheel pulley and then by gearing on to the main crank shaft. The machine is controlled by a paddle rod running the full length of the machine. Standard Equipment :
| Model | Shear Length in Mid Steel | Shear Capacity RPM 14401 | H.P. Required in per minute | Models Strokes in per Minute | Weight in Kgs |
|---|---|---|---|---|---|
| JUCS - 24 | 24" | 16 SWG | 3 | 40 | 500 |
| JUCS - 36 | 36" | 16 SWG | 3 | 40 | 700 |
| JUCSA - 40 | 40" | 16 SWG | 3 | 40 | 800 |
| JUCSB - 40 | 40" | 10 SWG | 3 | 40 | 1000 |
| JUCSB - 51 | 51" | 16 SWG | 3 | 40 | 1000 |
| JUCSB - 51 | 51" | 10 SWG | 5 | 40 | 1700 |
| JUCS - 60 | 60" | 10 SWG | 7.5 | 35 | 2000 |
| JUCS - 72 | 72" | 10 SWG | 7.5 | 35 | 2500 |
| JUCS - 80 | 80" | 10 SWG | 10 | 35 | 2800 |
| JUCS - 100 | 100" | 10 SWG | 10 | 35 | 3200 |
| How to Adjust the Blades When readjusting the blades on our shears to cut different thickness of metal the following clearance between the knives will be found useful and can be put into practice by employing a feeler guage. | |||||
| Thickness in inches | Clearance Brass | in inches Steel | Thickness in mm | Clearance Brass | in mm Steel |
|---|---|---|---|---|---|
| 0.015 | - | .0003 | 0.381 | .038 | .013 |
| 0.032 | .0015 | .0018 | 0.813 | .050 | .046 |
| 0.065 | .0015 | .0025 | 1.651 | .055 | .064 |
| 0.100 | .0030 | .0030 | 2.540 | .706 | .102 |
| 0.125 | .0040 | .0040 | 6.350 | .140 | .178 |
| By following the above Clearance the blades will last their maximum life and no un-necessary strain will be put on the machine. The knives are easily reset by means of adjusting screws on the table for that purpose. Adjusting screw should be well tightens after reseting otherwise machine will be damaged. | |||||
Connect with us
For Buyer 
For Seller 
Help 
