principle :

• rockwell
• rockwell cum brinell
• superficial
• superficial cum rockwell
• superficial cum rockwell cum brinell

precision fully enclosed seasoned cast iron body hardness tester ideally suitable for use on measuring hardness of metals and altoys of all types soft or hard in any shape whether flat, round, or irregular shapes equipped with special clampingl cone for holding job to avoid slipage to protect indentors. Dial gauge is covered with transparent glass cover to protect from dust and damages loading is by square threaded screw and unloading is by eccentric lever while penetration is hydraulically operated. Maximum depth of threat 150 mm.

the different models are available as described below.

• ag150 :
  *manual load selection.*manual zero setting type dial guage. *60, 100 & 150 kgf. Load range to check rockwell a, b & c scale. *supplied with 1 to 11 accessories.
• az-150 :
  *similar to ac-150, but auto zero setting type dial guage. *supplied with 1 to 11 acessories.
• alz-150:
  *automatic load selector provided at right side of the machine. *automatic zero setting type dial guage. *60,100 & 150 kgf major load. *to check rodcwell a, b & c scale. *supplied with 1 to 11 accessories.
• alz-b-187.5 :
  *similar to alz-150 with additional load 187.5 kgf. *to check rockwell a, b & c scale and brinell scale with ball dia. 2.5 mm & 187.5 kgf. Load. *supplied with 1 to 11, 13, 14, & 19 accessories.
• alz-b-250 :
  *similar to alz-b-187.5 with additional load 250 kgf. *to check rockwell a, b & c scale and brinel scale with ball dia. 5 mm and 250 kgf load. *supplied with 1 to 11, 13 to 16 & 19 accessories.
• sf-15-45 :
  *manual load selection. *automatic zero setting type superficial dial guage. *15, 30 & 45 kgf load range available from aluminium. *to check superficial n & t scale. *supplied with 1 to 8, 10, 11, 12, 17, & 18 accessories.
• az+sf-15-150 :
  *a unique combination of az-150 & sf-15-45 models. Manual load selection. *automatic zero setting type superficial dial guage. *15, 30, 45, 60, 100 & 150 bad range. *to check rockwell a, b & c scales & superficial n & t scales. *supplied with 1 to 12, 17 & 18 accessories.
• also available :
  az- (62.5, 100, 125, 150) az + sf (15 - 250)

standard equipment list :

1. dial guagedia. 80 mm.
2. flat table dia. 50 mm.
3. vee block table for cylindrical job dia.6mm. To 30 mm.s
4. diamond indentorwith 120° cone angle.
5. test blockmaster for rockwell "c" scale.
6. test blockmaster for rockwell "b" scale.
7. a set of allenkey3/32" & 3/16".
8. a set of telescopic sleeve for screw protection.
9. onaset of weight, 60, 100 & 150 kgf. Cast iron.
10. one ball indentor1/16" dia.
11. accessories kit box.
12. one set of weight 15, 30 & 45 kgf. Aluminium.
13. test blockmaster hb & 187.5 kgf. Load.
14. ball indentor2.5 mm. Dia.
15. test blockmaster hb & 250 kgf. Load.
16. ball indentor5 mm. Dia.
17. test blockmaster hrt 30.
18. test blockmaster hrt 30.
19. brinellmicroscope.

principle :

• rockwell
• rockwell cum brinell
• superficial
• superficial cum rockwell
• superficial cum rockwell cum brinell

precision fully enclosed seasoned cast iron body hardness tester ideally suitable for use on measuring hardness of metals and altoys of all types soft or hard in any shape whether flat, round, or irregular shapes equipped with special clampingl cone for holding job to avoid slipage to protect indentors. Dial gauge is covered with transparent glass cover to protect from dust and damages loading is by square threaded screw and unloading is by eccentric lever while penetration is hydraulically operated. Maximum depth of threat 150 mm.

the different models are available as described below.

• ag150 :
  *manual load selection.*manual zero setting type dial guage. *60, 100 & 150 kgf. Load range to check rockwell a, b & c scale. *supplied with 1 to 11 accessories.
• az-150 :
  *similar to ac-150, but auto zero setting type dial guage. *supplied with 1 to 11 acessories.
• alz-150:
  *automatic load selector provided at right side of the machine. *automatic zero setting type dial guage. *60,100 & 150 kgf major load. *to check rodcwell a, b & c scale. *supplied with 1 to 11 accessories.
• alz-b-187.5 :
  *similar to alz-150 with additional load 187.5 kgf. *to check rockwell a, b & c scale and brinell scale with ball dia. 2.5 mm & 187.5 kgf. Load. *supplied with 1 to 11, 13, 14, & 19 accessories.
• alz-b-250 :
  *similar to alz-b-187.5 with additional load 250 kgf. *to check rockwell a, b & c scale and brinel scale with ball dia. 5 mm and 250 kgf load. *supplied with 1 to 11, 13 to 16 & 19 accessories.
• sf-15-45 :
  *manual load selection. *automatic zero setting type superficial dial guage. *15, 30 & 45 kgf load range available from aluminium. *to check superficial n & t scale. *supplied with 1 to 8, 10, 11, 12, 17, & 18 accessories.
• az+sf-15-150 :
  *a unique combination of az-150 & sf-15-45 models. Manual load selection. *automatic zero setting type superficial dial guage. *15, 30, 45, 60, 100 & 150 bad range. *to check rockwell a, b & c scales & superficial n & t scales. *supplied with 1 to 12, 17 & 18 accessories.
• also available :
  az- (62.5, 100, 125, 150) az + sf (15 - 250)

standard equipment list :

1. dial guagedia. 80 mm.
2. flat table dia. 50 mm.
3. vee block table for cylindrical job dia.6mm. To 30 mm.s
4. diamond indentorwith 120° cone angle.
5. test blockmaster for rockwell "c" scale.
6. test blockmaster for rockwell "b" scale.
7. a set of allenkey3/32" & 3/16".
8. a set of telescopic sleeve for screw protection.
9. onaset of weight, 60, 100 & 150 kgf. Cast iron.
10. one ball indentor1/16" dia.
11. accessories kit box.
12. one set of weight 15, 30 & 45 kgf. Aluminium.
13. test blockmaster hb & 187.5 kgf. Load.
14. ball indentor2.5 mm. Dia.
15. test blockmaster hb & 250 kgf. Load.
16. ball indentor5 mm. Dia.
17. test blockmaster hrt 30.
18. test blockmaster hrt 30.
19. brinellmicroscope.