Mechanical Properties
Brinell hardness, HBW according to EN ISO 6506-1, on a milled surface 0,3-3 mm below surface.
At least per heat and 40 tons. The nominal thickness will not deviate more than + 15 mm from that of the tested
plate.
Surface Conditions
Hardox 400 can be delivered in shot blasted and primer coated surface condition.
Dimensions
Hardox 400 is supplied in thicknesses of 3 -130 mm. For dimensions with width
Tolerance
Thickness tolerances according to thickness precision guarantee AccuRollTech
TM. - AccuRollTech TM meets the requirements of EN 10 029. Class A, but offers more narrow tolerances. For shape, length, width and fl atness the tolerances conform to EN 10 029 (Flatness, Class N). Widths
Surface Properties
According to EN 10 163-2
- Requirements according to Class A
- Repair conditions according to Subclass 1

Mechanical Properties
Brinell hardness, HBW according to EN ISO 6506-1, on a milled surface 0,3-3 mm below surface.
At least per heat and 40 tons. The nominal thickness will not deviate more than + 15 mm from that of the tested
plate.
Surface Conditions
Hardox 400 can be delivered in shot blasted and primer coated surface condition.
Dimensions
Hardox 400 is supplied in thicknesses of 3 -130 mm. For dimensions with width
Tolerance
Thickness tolerances according to thickness precision guarantee AccuRollTech
TM. - AccuRollTech TM meets the requirements of EN 10 029. Class A, but offers more narrow tolerances. For shape, length, width and fl atness the tolerances conform to EN 10 029 (Flatness, Class N). Widths
Surface Properties
According to EN 10 163-2
- Requirements according to Class A
- Repair conditions according to Subclass 1