FEATURES :

1. Control and measurements of electrical input with complete panelised instruments.
2. The change in Temperature Distribution across the Composite Walls by altering the combination of slabs can be observed) 
3. Digital Temperature indicator.

DESCRIPTION :

This apparatus isdesigned to study characteristics of composite structures. Three types of slabs are provided namely cast iron, press wood, backelite. Small hand press is provided to remove air gap between two plates. Thermocouples and Digital Temperature indicator are used for Temperature measuirement  plates are provided symmetrically on either sides   nichrome heater, Set up is enclosed in a wooden cabinet with one side perspex.

SPECIFICATION :

1) Slab size :
a)  Cast Iron - 300 mm  x 25mm thick. 
b)  Press Wood - 300 mm  x 12 mm thick
c)  Backelite - 300 mm  x 19 mm thick
2) Nichrome heater of suitable capacity
3)  Control Panel comprising of -
i) Voltmeter 0 - 100/200 volts
ii)  Ammeter 0-2 amps.
iii)  Dimmerstat 0-230V, 2amps.
iv)  Digital temperature indicator 0-2000C with 0.10C least count using chromel 
alumel thermocouples  cold provided with cold junction compensation.
4)  Wooden cabinet of suitable size to accommodate the slab assembly with hand screew press.

Almost  care is taken for preparing this literature, but still if there are any mistakes,  those may be excused.  We reserve our right to change or modify the equipement without notice.

FEATURES :

1. Control and measurements of electrical input with complete panelised instruments.
2. The change in Temperature Distribution across the Composite Walls by altering the combination of slabs can be observed) 
3. Digital Temperature indicator.

DESCRIPTION :

This apparatus isdesigned to study characteristics of composite structures. Three types of slabs are provided namely cast iron, press wood, backelite. Small hand press is provided to remove air gap between two plates. Thermocouples and Digital Temperature indicator are used for Temperature measuirement  plates are provided symmetrically on either sides   nichrome heater, Set up is enclosed in a wooden cabinet with one side perspex.

SPECIFICATION :

1) Slab size :
a)  Cast Iron - 300 mm  x 25mm thick. 
b)  Press Wood - 300 mm  x 12 mm thick
c)  Backelite - 300 mm  x 19 mm thick
2) Nichrome heater of suitable capacity
3)  Control Panel comprising of -
i) Voltmeter 0 - 100/200 volts
ii)  Ammeter 0-2 amps.
iii)  Dimmerstat 0-230V, 2amps.
iv)  Digital temperature indicator 0-2000C with 0.10C least count using chromel 
alumel thermocouples  cold provided with cold junction compensation.
4)  Wooden cabinet of suitable size to accommodate the slab assembly with hand screew press.

Almost  care is taken for preparing this literature, but still if there are any mistakes,  those may be excused.  We reserve our right to change or modify the equipement without notice.