Following are the specifications of High Carbon Annealed Steel Strips Width 6 mm to 600 mm Thickness 0.2 mm to 4.5 mm Finish Bright and Matt Flatness When a five-meter length of the strip is allowed to lay on a flat surface no part of the strip shall lift more than five mm from the flat surface by its own weight. Grades High Carbon, Medium Carbon, Low Carbon and alloy steel Camber Maximum tolerance on edge camber in any 2000 mm length: 10 mm Coil Form In Slit width or Mill width Cut Length Minimum 1 Kgmm strip width,
Maximum 8 KMmm strip width Coil Weight Max length 3000 mm + 2 mm - Nil, Minimum length 500 mm + 2 mm - Nil Coil Dimensions Coil I.D. can be offered with 300 mm, 400 mm & 500 mm. Packing The cold rolled strips are packed with light coat of V.C.I. oil followed by wrapping with this polythene film and finally with Polythene lined Hessian strips. These are further covered with sea worthy G.I. sheets and strapped on metallic pallets in case of exports.

Following are the specifications of High Carbon Annealed Steel Strips Width 6 mm to 600 mm Thickness 0.2 mm to 4.5 mm Finish Bright and Matt Flatness When a five-meter length of the strip is allowed to lay on a flat surface no part of the strip shall lift more than five mm from the flat surface by its own weight. Grades High Carbon, Medium Carbon, Low Carbon and alloy steel Camber Maximum tolerance on edge camber in any 2000 mm length: 10 mm Coil Form In Slit width or Mill width Cut Length Minimum 1 Kgmm strip width,
Maximum 8 KMmm strip width Coil Weight Max length 3000 mm + 2 mm - Nil, Minimum length 500 mm + 2 mm - Nil Coil Dimensions Coil I.D. can be offered with 300 mm, 400 mm & 500 mm. Packing The cold rolled strips are packed with light coat of V.C.I. oil followed by wrapping with this polythene film and finally with Polythene lined Hessian strips. These are further covered with sea worthy G.I. sheets and strapped on metallic pallets in case of exports.