High Pressure Filters

The High Pressure Filters are designed to retain the particles contained in a liquid, either on the surface of the filter media or �in-depth�. Surface filtration requires a supporting media, whereas In-depth filtration is performed through a filter bed. Paramount importance in filtration Through a fine mesh medium, strainer, filter sleeve, etc. We have now developed a new small filter having maximum height of 3 ft. and required diameter to suit the plant capacity. In developing this new filter our emphasis has been to incorporate the high efficiency in filter bed operation by suitably modifying the design parameters and the filtration rate. This has resulted in reducing the size of the filter and reduction in quantity of filter media required, making the filter smaller in size and lighter in weight, and also reducing its cost of contraction. This filter requires less area for its installation/operation. Further the turn over period for the swimming pool water is considerably reduced. As a result daily operating period for the plant is also reduced. For larger capacity Swimming pool we are providing more than one filter operating in parallel flow. Rate of filtration is max. 40M/hr, which can increase according to Site condition. During back washing bed expansion is very less that is 2% only, hence height of Of pressure vessel is very less comparative other filter. Filter can remove the turbidity up To 20 ppm in normal condition and filtering capacity can increase as per raw water analysis. It is our proven design. All these factors add up to reduce the plant area, installation cost, plant operating cost and, less consummation of electric power etc. This filter we are manufacturing in M.S. construction and providing with multiport valve for filter plant operation such as water filtration, filter bed back washing, drain. We are fabricating the filter in Mild steel because its rugged construction and longer life as compared to polyethylene pressure filter.