Highway Guardrail Roll Forming Machine

Get Latest Price

Sold By : Gurukrupa Industries

Send Inquiry

Product Specifications

Coil width600 MM
Total HP for Line28
Vertical station7 nos.
Coil bore500 MM / 550 mm
Coil weight3MT Max
Mandrel movementHydro.
Maximum sheet width that can be formed490 mm
Size of machine8100 x 1400 x 1100 mm
Maximum sheet thickness in CRCA Strips that can be formed3 mm(M.S.)
Number of forming stations16 nos.
Horizontal distance between shafts450 mm
Speed of the machine5 To 10 mt/minit
Back TensionManually adjusted
Supply TypeManufacturer, Exporter, Supplier, Retailer

Preferred Buyer From : All over the world

Product Overview

D coiler 3 ton cap.
Punching press 50 tone
Entry Gate with
Roll Forming Machine with 16 station, 6 Gear Boxes & 20 H.P. electrical.
Control Panel semi auto
Cutting Unit (Hydro.) Punching press
- 50 tone Hydro. press
- 5 HP
- Oil tank 150 liter
Entry Gate
Entry gate will be provided for movement of sheet to roll former.
Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
Roll shafts
The roll shafts dia. 70 mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive
The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 15 HP motor
Tooling
One set of Tooling with EN31 / D3 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining trial and hardening ,bore grinding and inspection with final template for above.
Cutting Unit (Hydro)
Hydraulically operated power pack along with cutting die with 3 HP electrical.

Interested in this product? Ask for more details & Latest Price from seller

Send Inquiry

Company Overview

Retailer Of C Purlin Machine, POP Cross Section Machine, Ceiling Perimeter Machine, Ultra Ceiling Channel Machine, Corrugated Sheet Making Machine, Highway Guardrail Roll Forming Machine, Gypsum Ultra Channel Machine, Door Frame Roll Forming Machine, Cable Tray Making Machine, Glazed Tile Roll Forming Machine, Trapezoid Roll Forming Machine, Roofing Sheet Making Machine, Corrugated Sheet Roll Forming Machine, Roll Forming Line, Roof Panel Roll Forming Machine.

Share your requirements for a quick response!