Black Hir Epoxy Grout

Listing ID #4924808

Used On

• Marble and Natural Stone
• Ceramic Tiles (Floor and Wall)
• Porcelain Tiles (Floor and Wall)
• Glass mosaic & Glass tiles
• Vitrified tiles
• It can be applied Horizontally and Vertically.
• There's a range of Colored Epoxy Grout to match the color of Tiles, Stone, Glass tiles & Glass mosaic.
• Epoxy Grouting is for Kitchen, Bathroom, Balconies Flooring, Wall and Ceiling.

Shelf-Life - Factory sealed container of this product are guaranteed to be of first quality for two year, if stored off the ground in dry condition. High humidity will reduce the self-life of product

User Benefits

• Acid Resistant Colours
• Easy To Clean Require Less Water
• Easy To Wipe Off From Hands And Surfaces
• Labour Effective
• Easy Prepare And Apply
• User Friendly Material
• Effective Coverage Than Usual
• Low Cost, Multi-Purpose Grout.
• Non-Staining,
• Non-Shrinking.
• Shock And Water Resistant
• Needs No Curing
• Cures To Dense Hard Joint.
• Quick Setting And Achieve High Strength
• Available In Various Colors

Available Packaging

• lkg Pack Include (Part A 900gm, Part B 100gm)
• 5kg Pack Include ( Part A 4.5kg Part B 0.5 Kg) (Available In 2 Part & 3 Part)

(Contact HIR Representative or HIR Dealer for current pack size. )

Surface Preparation

Before commencing grouting, ensure the tile adhesive has set firmly. All Joints must be clean, dry and free from any contaminants such as dust, oil, wax, grease, curing agents or other substances that may affect adhesion performance, must be thoroughly cleaned with the help of wire brush - vacuum cleaner — Air Blower. Do not use in dump condition. Remove tile spacers between tiles if used.

Mixing And Product Preparation

• Part A (resin coloured paste) is packed in Plastic Container or polythene bag and Part B (liquid hardener in air tight sealed container) are packed Standard Epoxy Bucket container.
• Add component B into component A in clean vessel.
• Mix them for approx. 5 minutes, using a low revolution mixer (300 rpm).
• It is important to stir the mixture thoroughly near the sides and bottom of the container to achieve uniform dispersion of the hardener.
• Do not over-mix; It may cause the epoxy to flash or fast set.

Application

• Apply Epoxy Grout into joints Using a grout float or rubber squeeze or comfortable tool.
• Ensure that the grout is compacted into the entire depth of the joint
• Work in small areas and remove as much excess grout from the tile surface as possible.
• Do not exceed the working time of the grout.
• Change the water frequently to minimize epoxy residue.
• Clean the tile surface Use a sponge, sponge-board or Clean cloth dampened with clean water.
• Allow about 15 minutes for the grout to set a little before cleaning off.
• Once the grout has sufficiently set within the joints, polish the surface with a clean cloth.
• The joints will harden within 30 — 45 minutes depends up on weather conditions. After
• 90 minutes the tile joints will be stiff if temperature is 38C. If temperature is warmer requires less curing time is temper is on cooler side takes more time to Harden.

Coverage: Auto calculator available on website-

(Tile Length + Tiles Breath) x (Tiles Thickness x Joint Width) x Specific Gravity (Tiles Length + Joint Width) x (Tiles Breath + Joint Width) =kg/m2

Note: specific gravity= 1.75