Hollow Steel Sections

The company is chiefly engaged in the manufacturing, exporting, and supplying of the highest grade Hollow Steel Sections all across the globe. Our Hollow Steel Sections are provided with anti-rust oil coating from inside and outside for ensuring their safe delivery. The wide range of Hollow Steel Sections is offered by us as per IS: 4923 standards and client̢۪s specification, at affordable prices. We Offer

• Square Hollow Sections (SHS)
• Rectangular Hollow Sections (RHS)
• Round Hollow Sections
• Mild Steel Black ERW Square Tubes
• Rectangular Tubes
• Round Hollow Section Tubes
• Hot Rolled Steel Sections

Applications

• Oil & Gas
• Sugar
• Metallurgical
• Pharmaceutical
• Pulp and paper
• Chemical
• Boilers
• Railway Coaches
• Fertilizer
• Dairy & Food Products
• Instrumentation
• Ship
• Automobile
• Heat exchanger

Manufacturing Process

• Step – 1Purchasing Raw Material (Steel/Skelp) Material received from SAIL / ESSAR Steel Ltd. / Lloyds / ISPAT or other any approved vendor. The steel shall be fully conformed to the API 5L / IS Standard Specification or as per Customer’s Specification. Testing/ Checking and Identification of Raw material shall be done as per API 5L / IS Standard Specification
• Step – 2Edge Preparation & Milling Edges of Coil / Skelp are form in edge breaking unit at initial stage so that perfect forming is achieved at welding area. Strip edges are given mill cut on both sides with edge milling machine to make the edges clean and square for perfect butt welding with high frequency. It shall be done before passing the strip to forming process.
• Step – 3Forming of Pipe Strip is passed in number of horizontal rolls after edge breaking and form cages supported by vertical rolls to receive an open edge round tube before welding. At the final stage of forming, rolls are provided with guide fins to have a proper proportionate gap and correct entry in welding roll.
• Step – 4High Frequency Welding Finally the pipe shape performed after forming process, it passed through welding heads followed by the seam guide. The process of welding is based on ERW process. Electric welding shall be performed with a minimum welder frequency of 200 KHz. The fusion takes place through a roll assembly set for proper welding. Bead trimming shall be done as per API 5L / IS Standard or as per Customer Specification.
• Step – 5Seam Normalizing Normalizing is carried out on weld and HAZ after welding at the temperature of 8500 C to 9000 C. The temperature of seam normalizing is monitored by a non contact indicator having the digital display along with recorder. Equipment: Seam Normalizer Capacity : 500 KW
• Step – 6 Sizing A set of sizing roll is ahead of cooling zone, water cooled pipe is passed through sizing rolls which control the Ovality and required dimensions, which is finally verified with measuring instruments as specified in relevant Specification.
• Step – 7NDT Testing (Eddy Current) Eddy current testing is the process of inducing small electrical currents in an electrically conductive article and observing the resultant reaction between the magnetic fields involved. Equipment: Eddy Current Flaw Detector (PC based).
• Step – 8Finishing of the Pipes Finished pipe are cut to required length by cut of carriage. Thereafter both ends of pipes are beveled by the end facer. Finally each pipe are checked for its Outer diameter, Inner Diameter, Thickness, Straightness, and length.
• Step – 9Hydro Testing After completing all the above process, all pipes transferred to the hydro testing bench. The test pressure shall be given to the pipes as per relevant specification or as per Customer Requirement.
• Step – 10Galvanizing Process Hydro Test passed pipes are send for Hot Dip Galvanizing confirming to various Indian Standard / International Standard.
• Step – 11Marking Marking on the pipes shall be paint stenciled as stipulated in API 5L/ IS Standard or as per the customer’s requirement, on each length of the pipe