Hydraulic Brake Fluid Dot 3

Hydraulic Brake Fluid Dot 3

Listing ID #4881963

Get Latest Price
  • Supply Type Exporter
Preferred Buyer From : All over the world

The only effective link between your foot on the brake Pedal and the brake assembly at each wheel.   The Composition of " K-INT" Hydraulic Brake-Fluid DOT-3 is Chemically balanced and engineered to obtain optimum performance and to provide maximum safety. It exceeds the performance requirements of SAE JI703 and the United Stated FMVSS No. 116 DOT-3 specifications and IS-8654 TYPE-I.
View More Details
Send Enquiry

Company Information

Kalika International verified-icon
Sachin, Surat, Gujarat
View Number
  • Member Since 15 Years
  • Nature of Business Manufacturer

Ask for more detail from the seller

Contact Supplier
View Company Details

Product Details no_img_icon

Typical Technical Data Is Given Below :

  SAE J-1703 FMVSS Dot 3 KI220 KIX250
Equilibrium Reflux Boiling Point (Deg C) 205min 205min >220 >250
Wet Equilibrium Reflux Boiling Point (Deg C) 140min 140min 147 150
Viscosity
@ 40 Deg C (cSt.) 1800 max 1500 max 1400 1450
@ 100 Deg C (cSt.) 1.5 min As SAE 1.9 2.1
Specific Gravity @ 20 Deg C - - 1.05 1.06
pH value 7.0-11.5 As SAE 8.5 8.5
Fluid Stability
High Temperature (Deg C) ±3 ±3 2.0 1.5
Chemical (Deg C) ±2 ±3 1.0 0.5
Effect On Rubber
(SBR) Rubber - - - -
70 Deg Swell (mm) 0.15-1.4 As SAE 0.21 0.22
Volume Change (%) - - - -
Softening (RHD) 10 max As SAE 3 4
Disintergration None As SAE None None
120 Deg C Swell (mm) 0.15-1.4 As SAE 0.3 0.3
Volume Change (%) - - - -
Softening (RHD) 15 max As SAE 4 4
Disintegration None As SAE None None
Effect On Rubber
EPDM Rubber        
70 Deg Volume Change (%) 0-10 - 2.0 3.0
Softening (RHD) 10 max - 2 2
Disintegration None - None None
120 Deg C Volume Change (%) 0-10 - 2.5 4.0
Softening (RHD) 15 max - 3 3
Evaporation Loss
@ 100 Deg C (% w/w)

80 max

 As SAE 55 60
Residue Pour Point (Deg C) -5 max As SAE <-5
Residue Texture Not Gnitty As SAE Pass Pass
Fluidity and Appearance at low temperature
-40 Deg C Appearance Clear As SAE Clear Clear
Flow Time (Sec) 10 max As SAE 3 3
-50 Deg C Appearance Clear As SAE Clear Clear
Flow Time (Sec) 35 max As SAE 5 5
Water Tolreance
-40 Deg C Appearance Clear As SAE Clear Clear
Flow Time (Sec) 10 max As SAE 2 2
-50 Deg C Appearance Clear As SAE Clear Clear
Sediment (% v/v) 0.15 max As SAE None None
Compatibility
-40 Deg C Appearance Clear As SAE Clear Clear
-60 Deg C Appearance Clear As SAE Clear Clear
Sediment (% v/v) 0.05 max 0.15 max None None
Corrosion
Weight change (mg/cm2)        
Tinned Iron 0.2 max As SAE <0.1 <0.1
Steel 0.2 max As SAE <0.1 <0.1
Aluminium 0.1 max As SAE <0.1 <0.1
Cast Iron 0.2 max As SAE <0.1 <0.1
Brass 0.4 max As SAE <0.1 <0.1
Copper 0.4 max As SAE <0.1 <0.1
Pitting None As SAE None None
Solution pH 7-11.5 As SAE 8.0 8.0
Appearance of Test Liquid No Gelling or crystals No Gelling or crystals Pass Pass
Condition of Rubber
After Corrosion Test No disintegration      
Swell (mm) 1.4 max As SAE 0.1 0.1
Softening (RHD) 15 max As SAE 2 2
Appearance No Tackiness - None None
Sediment (% v/v) 0.1 max As SAE <0.05 <0.05
Resistance to Oxidation
Weight change (mg/cm2)        
Aluminium <0.05 <0.05 <0.03 <0.03
Cast Iron 0.3 max 0.3 max <0.1 <0.1
Appearance No gum or pitting - Pass Pass
Stroking Properties
  To Pass To Pass To Pass To Pass

Company Details close-icon

Kalika International has been working under the umbrella of SWASTIK GROUP of companies, which is engaged in Brake Fluids, Petrochemical, Lubricants, Real Estate and other sectors. Our company is a trusted manufacturer and exporter of Engine Coolants, Extreme Pressure Grease No. 1, Extreme Pressure Grease No. 2, High Temperature Moly Grease, Hydraulic Brake Fluid Dot 3, Hydraulic Brake Fluid Dot 4, Hydraulic Brake Fluid Dot 5, Lithium Grease no. 2, Lithium Grease No. 3, MPSP Grease, etc. We are an ISO 9001 2015 certified company having Export Award From Chemexcil. Today, we have become one of the largest manufacturers of brake fluid in Asia with huge clientele in more than 30 countries.

 

Mr. Paressh Rathod is the CEO of Surat (Gujarat, India) based Kalika International. He has years of expertise in the domain of Extreme Pressure Grease No. 2, High Temperature Moly Grease, Hydraulic Brake Fluid Dot 3, Hydraulic Brake Fluid Dot 4, Hydraulic Brake Fluid Dot 5, etc.

 

Resources
Our high-tech manufacturing unit is located over an area of 16000 SQM with production capacity of more than 25000 mt / annum. We also have a fully-equipped laboratory at Mumbai, Navsari (Gujarat) and Sachin (Gujarat) having recommended equipments by the test equipment manufacturers and verified through cyclic Round Robin Testing Program. We also have a modern R & D to carry out different inventions and researches to develop new products. 

 

Our Clientele
We have gained huge recognition in the market of Africa, South East Asia, Australia, Middle East, and China. Our company has a long list of reputed clients such as

  • BOSCH
  • ENOC
  • ADNOC
  • PETRON


  • Nature of Business Manufacturer / Exporter / Supplier
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for Hydraulic Brake Fluid Dot 3?

Quantity
Seller Contact Details
  • Seller Kalika International
  • Address Sachin, Surat, Gujarat
View Mobile No Send Enquiry

Find similar products

View all products in Brake Fluid

Find Seller from near by Cities

Browse Related Categories

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice
Hydraulic Brake Fluid Dot 3 at Best Price in Surat - ID: 4881963 | Kalika International
Sales : +91-9953717914 | Support : +91-9700318318
Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement
Hydraulic Brake Fluid Dot 3

Hydraulic Brake Fluid Dot 3

Listing ID #4881963

Get Latest Price
  • Supply Type Exporter
Preferred Buyer From : All over the world

The only effective link between your foot on the brake Pedal and the brake assembly at each wheel.   The Composition of " K-INT" Hydraulic Brake-Fluid DOT-3 is Chemically balanced and engineered to obtain optimum performance and to provide maximum safety. It exceeds the performance requirements of SAE JI703 and the United Stated FMVSS No. 116 DOT-3 specifications and IS-8654 TYPE-I.
View More Details
Send Enquiry

Company Information

Kalika International verified-icon
Sachin, Surat, Gujarat
View Number
  • Member Since 15 Years
  • Nature of Business Manufacturer

Ask for more detail from the seller

Contact Supplier
View Company Details

Product Details no_img_icon

Typical Technical Data Is Given Below :

  SAE J-1703 FMVSS Dot 3 KI220 KIX250
Equilibrium Reflux Boiling Point (Deg C) 205min 205min >220 >250
Wet Equilibrium Reflux Boiling Point (Deg C) 140min 140min 147 150
Viscosity
@ 40 Deg C (cSt.) 1800 max 1500 max 1400 1450
@ 100 Deg C (cSt.) 1.5 min As SAE 1.9 2.1
Specific Gravity @ 20 Deg C - - 1.05 1.06
pH value 7.0-11.5 As SAE 8.5 8.5
Fluid Stability
High Temperature (Deg C) ±3 ±3 2.0 1.5
Chemical (Deg C) ±2 ±3 1.0 0.5
Effect On Rubber
(SBR) Rubber - - - -
70 Deg Swell (mm) 0.15-1.4 As SAE 0.21 0.22
Volume Change (%) - - - -
Softening (RHD) 10 max As SAE 3 4
Disintergration None As SAE None None
120 Deg C Swell (mm) 0.15-1.4 As SAE 0.3 0.3
Volume Change (%) - - - -
Softening (RHD) 15 max As SAE 4 4
Disintegration None As SAE None None
Effect On Rubber
EPDM Rubber        
70 Deg Volume Change (%) 0-10 - 2.0 3.0
Softening (RHD) 10 max - 2 2
Disintegration None - None None
120 Deg C Volume Change (%) 0-10 - 2.5 4.0
Softening (RHD) 15 max - 3 3
Evaporation Loss
@ 100 Deg C (% w/w)

80 max

 As SAE 55 60
Residue Pour Point (Deg C) -5 max As SAE <-5
Residue Texture Not Gnitty As SAE Pass Pass
Fluidity and Appearance at low temperature
-40 Deg C Appearance Clear As SAE Clear Clear
Flow Time (Sec) 10 max As SAE 3 3
-50 Deg C Appearance Clear As SAE Clear Clear
Flow Time (Sec) 35 max As SAE 5 5
Water Tolreance
-40 Deg C Appearance Clear As SAE Clear Clear
Flow Time (Sec) 10 max As SAE 2 2
-50 Deg C Appearance Clear As SAE Clear Clear
Sediment (% v/v) 0.15 max As SAE None None
Compatibility
-40 Deg C Appearance Clear As SAE Clear Clear
-60 Deg C Appearance Clear As SAE Clear Clear
Sediment (% v/v) 0.05 max 0.15 max None None
Corrosion
Weight change (mg/cm2)        
Tinned Iron 0.2 max As SAE <0.1 <0.1
Steel 0.2 max As SAE <0.1 <0.1
Aluminium 0.1 max As SAE <0.1 <0.1
Cast Iron 0.2 max As SAE <0.1 <0.1
Brass 0.4 max As SAE <0.1 <0.1
Copper 0.4 max As SAE <0.1 <0.1
Pitting None As SAE None None
Solution pH 7-11.5 As SAE 8.0 8.0
Appearance of Test Liquid No Gelling or crystals No Gelling or crystals Pass Pass
Condition of Rubber
After Corrosion Test No disintegration      
Swell (mm) 1.4 max As SAE 0.1 0.1
Softening (RHD) 15 max As SAE 2 2
Appearance No Tackiness - None None
Sediment (% v/v) 0.1 max As SAE <0.05 <0.05
Resistance to Oxidation
Weight change (mg/cm2)        
Aluminium <0.05 <0.05 <0.03 <0.03
Cast Iron 0.3 max 0.3 max <0.1 <0.1
Appearance No gum or pitting - Pass Pass
Stroking Properties
  To Pass To Pass To Pass To Pass

Company Details close-icon

Kalika International has been working under the umbrella of SWASTIK GROUP of companies, which is engaged in Brake Fluids, Petrochemical, Lubricants, Real Estate and other sectors. Our company is a trusted manufacturer and exporter of Engine Coolants, Extreme Pressure Grease No. 1, Extreme Pressure Grease No. 2, High Temperature Moly Grease, Hydraulic Brake Fluid Dot 3, Hydraulic Brake Fluid Dot 4, Hydraulic Brake Fluid Dot 5, Lithium Grease no. 2, Lithium Grease No. 3, MPSP Grease, etc. We are an ISO 9001 2015 certified company having Export Award From Chemexcil. Today, we have become one of the largest manufacturers of brake fluid in Asia with huge clientele in more than 30 countries.

 

Mr. Paressh Rathod is the CEO of Surat (Gujarat, India) based Kalika International. He has years of expertise in the domain of Extreme Pressure Grease No. 2, High Temperature Moly Grease, Hydraulic Brake Fluid Dot 3, Hydraulic Brake Fluid Dot 4, Hydraulic Brake Fluid Dot 5, etc.

 

Resources
Our high-tech manufacturing unit is located over an area of 16000 SQM with production capacity of more than 25000 mt / annum. We also have a fully-equipped laboratory at Mumbai, Navsari (Gujarat) and Sachin (Gujarat) having recommended equipments by the test equipment manufacturers and verified through cyclic Round Robin Testing Program. We also have a modern R & D to carry out different inventions and researches to develop new products. 

 

Our Clientele
We have gained huge recognition in the market of Africa, South East Asia, Australia, Middle East, and China. Our company has a long list of reputed clients such as

  • BOSCH
  • ENOC
  • ADNOC
  • PETRON


  • Nature of Business Manufacturer / Exporter / Supplier
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for Hydraulic Brake Fluid Dot 3?

Quantity
Seller Contact Details
  • Seller Kalika International
  • Address Sachin, Surat, Gujarat
View Mobile No Send Enquiry

Find similar products

View all products in Brake Fluid

Find Seller from near by Cities

Browse Related Categories

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice