Listing ID #4194516
Company Information
Ask for more detail from the seller
Contact SupplierDESCRIPTION :
Crawler Mounted Drill Rig JRD Model CD-360 DTH drilling Rig Hydraulically operated capable of handling 3 mtrs. (10ft) Drill pipe with following Technical specification.
MAST & BOOM :
Sturdy structural Channel Type Mast reinforced with suitable cross members strong enough to withstand high drilling loads. The Boom is provided with a heavy duty lift and swing cylinders to provide rigidity while drilling. The Boom lift , Boom Swing ,Guide Tilt, Guide swivel and Guide Dump arrangements are through hydraulic double acting cylinders allows the operator to achieve a wide range of vertical, horizontal and angle drilling positions.
HYDRAULIC SYSTEM :
The hydraulic system is designed for fuel efficient and high productive capacity. All hydraulic elements like Pumps, Motors, Valves and hydraulic cylinders are adequate capacity and of reputed make.
Variable displacement Hydraulic Pump with proportional Control Valve (PVG 32 Make: Sauer Danfoss) are used for Rotation Unit, Feed Unit (for fast & micro feeding) and for Self Propulsion of the Rig. All hoses can withstand high pressure and high temperature. The Hydraulic oil is fine filtered during suction and return lines in operation.
HYDRAULIC POWER PACK :
Hydraulic Power pack is driven by Diesel Engine water cooled with Power 33H.P @1500 RPM to drive one main Hydraulic Pump.
Mode of Drilling | Down the Hole Air Hammer |
Hole Diameter | 105~127mm (4â…›”~ 5”) |
Max. Drilling Depth | 36 mtrs. (120 ft) |
Drill Pipe Diameter | 76mm/89mm (3” / 3½”) |
Drill Pipe Length | 3 mtrs. (10 ft) |
Rotary Head | |
RPM | 0~50 |
Max. Torque | 1,350 Nm (12,300 lbf.in) |
FEED UNIT | |
Type of Feed | Chain feed |
Feed Length (MAST) | 5000mm (16’4”) |
Travel Length | 4000mm (13’ 1”) |
Pull Down Force | 0~2200 kgf |
Pull Up Force | 0~2200 kgf |
Pull Up & Pull Down Speed | 0~ 15 mtrs./min |
MAST & BOOM POSITIONING | |
Boom Lift above Centre Line | 45º up, 20º down |
Boom Swing | 45º right , 45º left |
Drill Guide Tilt | 75º (two position) |
Drill Guide Swing (Horizontal) | 45º right , 45º left |
Drill Guide Dump | 750mm |
HORIZONTAL DRILLING RANGE | |
Minimum Height from Ground | 860mm |
Maximum Height from Ground | 2600mm |
Maximum width | 1400mm |
UNDERCARRIAGE SYSTEM : |
The above RIG is mounted on Crawler (Track Parts) having track shoe width 260mm (10”) with Lifetime-lubricated track rollers, idlers and suitable Sprocket. Each track is driven by hydraulic motor through planetary Gear reduction unit with built-in braking system |
Max. Speed | 2.0 Km/h |
Gradeability | 30 Deg |
Track Shoe Type | Single Grouser |
Track Shoe Width | 260mm (10”) |
Wheel Base | 1640mm |
Ground Pressure | 0.54 kgf/cm2 (7.68 psi) |
Track Oscillation | ±10 Degree |
No. of Roller | 5 ( for each track) |
Ground Clearance | 260mm |
AIR LINE LUBRICATOR | |
Provided |
DIMENSIONS & WEIGHT | |
Overall Length | 5,200mm (17’) |
Overall Width | 2,200mm (7’ 2”) |
Overall Height | 2,400mm (7’ 9”) |
Total Weight | 4,500kgs (9,920 lb) |
AIR COMPRESSOR (Recommended) | ||
Minimum | Maximum | |
Free Air Delivery | 11.35 m3/min (400 cfm) | 17 m3/min (600 cfm) |
Working Pressure | 10.5 kg/cm2 (150 psi) | 14 kg/cm2 (200 psi) |