Hydraulic Valves

Direction Control Valves: 
5 sizes from NG 6 to NG 32. Flow up to 2000 lpm, 350 bar, Manifold mounting according to DIN, ISO, CETOP, NFPA. Electric, hydraulic and pneumatic actuation. 

1. Low Watt Direction Control Valves:
   Electrical connection to DIN 43650 or M12X1 and DESINA Version.
   Especially suitable for Bus system due to a low-current input. Service friendly through leakage free coil change

• Electric Control Pilot Operated:
  4 sizes from NG10 to NG 32, Flow up to 2000 lpm, 350 bar, Manifold mounting according to DIN, ISO, CETOP, NFPA.

• Proportional Valves: 
  5 sizes from NG 6 to NG 32. Flow up to 2000 lpm, 350 bar, Manifold mounting according to DIN, ISO, CETOP, NFPA. Interfaces with integrated electronics. High response for closed loop application.
  

• Digital Electronics for Valve amplifier: 
  Digital and reproducible input signals, ramps parameters. Double PWM amplifiers. Resolution of signal and actual valve less than 0.05%. High safety and compliant with EMV specifications. RS 232 serial interface. For Electrohydraulic axis regulators. 
  

• Pressure flow and check valves:
  4 sizes for NG 6 to NG32. Flow up to 350 lpm, 350 bar, manifold mounting, mechanically adjustable, Electrically dischargeable or proportionally adjustable through integrated or external electronics.
  

• Flow Control Metering and shut off valves:
  Manatrol color flow series: 9 Sizes from 1/8 inch to 2 inch BSP. Flow up to 600 lpm, 350 bar. Inline & manifold mounting. 
  

• Sandwich Type Manapak Valves:
  4 sizes NG 6 to NG 25. Up to 350 bar. RM Pressure relief Valve. PRM pressure reduction valve, FM flow control valve. CM directly operated check Valve, CPOM Pilot operated check Valve.
  

• Pressure Switches:
  Flange & treaded connection. Switching pressure range 3 - 40, 10 -100,10 -160, 20 -250 bar, Pressure capability 315 bar. Adjustments with hollow hexagonal screw or scaled knob. AC/DC power supply. Optional locking knob.
  

• Pressure Intensifiers:
  Mounting pattern NG 6. Check valves NG 6 and NG 10 with subplate mounting option. Maximum pressure up to 500 bar. Transmission ratio 1:2 and 1:4. Continuous flow increases with minor pulsation effect.
  

• Threaded Cartridge Valves: 
  Directional pressure, flow and shut-off valves. Housing optional. 5 sizes up to 250 lpm, 210 bar. Solenoid or proportional actuation. Industrial or mobile applications.
  

• Slip-in Cartridge valves: 
  DIN 24342. 8 sizes NG 16 to NG 100, Flow up to 10000 lpm, 350 bar, Modular construction system for pilot valves and cartridges. Also as safety valve with position control position control.