Incubator Bod

Our Incubator Bod (bio-chemical oxygen demand) designed for low temperature incubator and determination of bio-chemical oxygen demand (b.o.d) double wall construction inner chamber made of richly anodized aluminium or highly polished stainless steel sheet with self supports for wide range of shelf spacing supplied with two/three removeable perforated shelves exterior made out o thick mild steel sheet duly finished in white stoving enamel paint or pastle mat finish colour combination outer double wall door is provided with magnetic gasket and lock & key arrangement inner door made out of clear acrylic shet allowing inspection of material in the chamber with out disturbing the chamber temperature door operated inner illumination has been provided.the gap between wallsof equipment are filled with glass wool for temp insulation.the cabinet is mounted on castors. Temperature is controlled by a sensitive thermostat from 5 c to 50 c + 1c for lower tempworking a standred cooling unit with a seald compressor with protective devices has been provided below the chamber for safe and efficient working heating arrangement has been made with in the chamber for higher temp working the temp can be regulated with the range by means of a high precision double action thermoregulatory inner air circulating system is provided to achieve uniform temperature in the whole chamber.a control panel is provided with various indicatorson-off switch l-shaped thermometer supplied with cord and plug etc the equipment is workable on 220v ac 50hz single phase. inner chambers sizes in mms capacity in cft.a) 610x455x410 (24”x18”x16”) 4.00b) 825x500x415 (33”x20”x16.6) 6.1 c) 865x650x575 (34”.6”x22.6”x22.6”) 10.0d) 900x650x575 (36”x26”x23”) 12.0optional:- digital temp indicator-cum-controllertimer 0-24 hours day night cycle .co2 /air mixture intel nozzle humidity system by spray or injection methodsaudio visual alarmautomatic voltage stabilizer 3 kva (must).