Industrial lubricants oil

Listing ID #4243387

HYDRAULIC & CIRCULATING OILS (ANTIWEAR TYPE)

• Purerol Hydraulic Oil 15/22, 32, 46, 68, 100, 150, 220, 320 & 460

Antiwear Hydraulic oils are generally used for the lubrication of axial, piston, vane and gear pumps. These oils are especially required in systems where both piston and vane pumps are used for heavy duty service. These oils may also be used for lubricating light loaded gears and bearings. These oils are not intended for use in hydraulic systems containing silver plated components.

ANTIWEAR HYDRAULIC OIL (EXTRA HEAVY DUTY TYPE)

• Purerol HLP 22, 32, 46, 68,100 & 150

These heavy duty type of antiwear hydraulic oils are especially required for use in oil operated fluid power systems that are subjected to shock loads, variable speed for continuous operating condition of high severity. These oils are also used for moderately loaded industrial gears, bearings and hydraulic devices with hydro mechanical actuator.

INDUSTRIAL GEAR OILS

• Purerol Gear EP 46, 68 ,100,150,220,320 , 460,680 & 1000

These oils are recommended for systems where the operation is under extremely severe and hostile environments such as Gear drives

Industrial Gear oils of Rust and Oxidation inhibited(R&0) - equivalent performance standards are also available. It can be made upon request.

GENERAL PURPOSE MACHINERY OIL

• Purerol Machine Oil 32, 46, 68 ,100,150,220,320 & 460

Recommended for general lubrication of industrial equipment bearings, line shafts & for use in the lubrication systems of machine tools, textile machines and other machine parts, which are lubricated by a thin film of oil. Heavier grades of these oils are also used in the lubrication of small open gears, under light duty conditions.

SPINDLE OILS

• Purerol Spindle  2 ,5, 10/12 & 22

These oils are premium quality high performance products primarily designed for the lubrication of high-speed spindles in machine tools which is formulated from selected high-quality, low viscosity base oils and additives that impart good resistance to oxidation and protection from rust and corrosion. They possess very good resistance to foaming and separate readily from water.

REFRIGERATION COMPRESSOR OILS

• Purerol Friztech 22 , 32 , 46 & 68

These oils are recommended for a wide range of refrigeration compressors using all conventional refrigerants (CFCs) except sulphur dioxide and are suitable for both reciprocating as well as rotary compressors.

TURBINE OILS

• Purerol Turbine 32 , 46 , 68 & 100

These oils can provide exceptional demulsibility, oxidation stability and deposit control which is designed to meet the critical lubrication needs of combined cycle turbines, large heavy-duty industrial gas turbines, and gas and steam turbines with and without loaded gearboxes. 

COMPRESSOR OILS

• Purerol Press 32 , 46 , 68 , 100 , 150 ,220 & 320

These oils promote system efficiency by suppressing foaming, releasing trapped air and rapidly separating out condensed water. They also help reduce wear, so that the compressors can continue working as their designers intended.

MACHINE TOOLWAY OILS

• Purerol Way 32 , 46 , 68 & H 32

These oils are recommended for lubrication of slides and tables of machine tools for both horizontal and vertical guide ways. It exhibits very good oxidation stability and Contains anti-wear, non-drip and oiliness additives