CIL provides 'Ingress Protection Testing' services in Visakhapatnam. IP65 Testing, IP67 Testing, IP55 Testing, etc.

IP65 Testing, IP67 Testing, IP55 Testing, etc. Performance Testing against Water and Dust Ingress CIL is accredited to perform Ingress Protection (IP) testing to IEC standard 60529, NEMA 250 testing, and UL 50E testing. Both UL testing and IP testing are typically performed on enclosures to determine the level of protection they provide against water, dust, ice, etc. Ingress Protection (IP) Testing IP testing rates and classifies the degree of protection the product provides against the intrusion of solid objects (i.e., body parts like hands and fingers), dust, accidental contact, and water in the electrical enclosure or casing. The numbers (characteristic numerals) indicate conformity with the conditions outlined in the tables below. If there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. IP measures how well a device is protected from both solid objects and liquids.

For example, for IP57 and IP67, the first digit tells us how well the product is protected from solids. The second digit is about how resistant the product is to water. Ingress Protection (IP) Testing CIL has the capability to perform IP (Ingress Protection, also referred to as Intrusion Protection) testing per numerous standards, including IEC 60529.  This testing is designed as a means to verify that your product’s internal components are adequately sealed and protected from the intrusion of foreign objects, liquids, and fine particles. This testing is also designed to ensure that the product user is protected from access to hazardous parts. The different levels of the IP Test allow you to determine, at different rates of flow (liters per minute), if your unit will hold up to the amount of water being sprayed at it, and to ensure the unit is safe from intrusion of foreign objects (such as fingers, etc.).

CIL can perform several IP Tests, such as: IP Standard CodesIPX1: Protected against falling water Equivalent to 3-5mm rainfall per minute for a duration of 10 minutes.IPX2: Protected against falling water when tilted up to 15 degrees – Same as IPX1 but unit is tested in 4 fixed positions – tilted 15 degrees in each direction from normal operating position.IPX3: Protected against spraying water – Water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80-100kN/m2 for 5 min.IPX4: Protected against splashing water – Same as IPX3 but water is sprayed at all angles.IPX5: Protected against water jets – Water projected at all angles through a 6.3mm nozzle flow rate of 12.5 liters/min at a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters.IPX6: Protected against heavy seas – Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 liters/min at a 100kN/m2 pressure for 3 minutes from a distance of 3 meters.IPX7: Protected against water immersion – Immersion for 30 minutes at a depth of 1 meter.IPX8: Protected against water submersion – Equipment suitable for continual submersion in water under conditions as specified by manufacturer.

IP1X: Protected against solid foreign objects of 50 mm diameter and greater.IP2X: Protected against solid foreign objects of 12.5 mm diameter and greater.IP3X: Protected against solid foreign objects of 2.5 mm diameter and greater.IP4X: Protected against solid foreign objects of 1.0 mm diameter and greater.IP5X: Dust-protected – Ingress of dust is not totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the apparatus or to impair safety.IP6X: Dust-tight – No ingress of dust. 

CIL provides 'Ingress Protection Testing' services in Visakhapatnam. IP65 Testing, IP67 Testing, IP55 Testing, etc.

IP65 Testing, IP67 Testing, IP55 Testing, etc. Performance Testing against Water and Dust Ingress CIL is accredited to perform Ingress Protection (IP) testing to IEC standard 60529, NEMA 250 testing, and UL 50E testing. Both UL testing and IP testing are typically performed on enclosures to determine the level of protection they provide against water, dust, ice, etc. Ingress Protection (IP) Testing IP testing rates and classifies the degree of protection the product provides against the intrusion of solid objects (i.e., body parts like hands and fingers), dust, accidental contact, and water in the electrical enclosure or casing. The numbers (characteristic numerals) indicate conformity with the conditions outlined in the tables below. If there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. IP measures how well a device is protected from both solid objects and liquids.

For example, for IP57 and IP67, the first digit tells us how well the product is protected from solids. The second digit is about how resistant the product is to water. Ingress Protection (IP) Testing CIL has the capability to perform IP (Ingress Protection, also referred to as Intrusion Protection) testing per numerous standards, including IEC 60529.  This testing is designed as a means to verify that your product’s internal components are adequately sealed and protected from the intrusion of foreign objects, liquids, and fine particles. This testing is also designed to ensure that the product user is protected from access to hazardous parts. The different levels of the IP Test allow you to determine, at different rates of flow (liters per minute), if your unit will hold up to the amount of water being sprayed at it, and to ensure the unit is safe from intrusion of foreign objects (such as fingers, etc.).

CIL can perform several IP Tests, such as: IP Standard CodesIPX1: Protected against falling water Equivalent to 3-5mm rainfall per minute for a duration of 10 minutes.IPX2: Protected against falling water when tilted up to 15 degrees – Same as IPX1 but unit is tested in 4 fixed positions – tilted 15 degrees in each direction from normal operating position.IPX3: Protected against spraying water – Water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80-100kN/m2 for 5 min.IPX4: Protected against splashing water – Same as IPX3 but water is sprayed at all angles.IPX5: Protected against water jets – Water projected at all angles through a 6.3mm nozzle flow rate of 12.5 liters/min at a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters.IPX6: Protected against heavy seas – Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 liters/min at a 100kN/m2 pressure for 3 minutes from a distance of 3 meters.IPX7: Protected against water immersion – Immersion for 30 minutes at a depth of 1 meter.IPX8: Protected against water submersion – Equipment suitable for continual submersion in water under conditions as specified by manufacturer.

IP1X: Protected against solid foreign objects of 50 mm diameter and greater.IP2X: Protected against solid foreign objects of 12.5 mm diameter and greater.IP3X: Protected against solid foreign objects of 2.5 mm diameter and greater.IP4X: Protected against solid foreign objects of 1.0 mm diameter and greater.IP5X: Dust-protected – Ingress of dust is not totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the apparatus or to impair safety.IP6X: Dust-tight – No ingress of dust.