Instrumentation Cables, Construction : Twisted / Flat

We present high quality Instrumentation Cables which pose high conductivity. These Instrumentation Cables are made out of high grade raw material and provide sage usage. Our Instrumentation Cables are tested by the experts under strict industry norms for best quality. More over, we offer our Instrumentation Cables at economic prices. Type I - Power Cable Product Group : A3I

• Applications :
  • BS5308 cables are applied to carry voice and data services
  • Interconnection between electrical equipments and instruments, especially in and around process plants, where transducer generated signals are supplied by panels, controllers and other devices
• Standards : BS5308 Part 1
• Conductor : Class 1, 2 or 5 plain copper conductors to BS EN 60228:2005 (previously BS6360)
• Pairing : Two insulated conductors uniformly twisted together with a lay not exceeding 100 mm.
• Insulation : PE (Polyethylene) to BS6234 or XLPE (Cross Linked Polyethylene) to BS5308 for LSZH (Low Smoke Zero Halogen) Cables.
• Screen :
  • Collectively Screened Cables : Aluminum/Polyester tape is placed in continuous contact with a copper drain wire which is 0.5mm² tinned. It is applied metallic side down over the laid up pairs.
  • Individually Screened Pairs : Aluminum/Polyester tape is applied to each pair, metallic side down and in continuous contact with a 0.5 mm² tinned copper drain wire.
• Sheath : PVC (Polyvinyl Chloride) to BS7655 or LSZH (Low Smoke Zero Halogen)
• Sheath Colour : Blue/ Black
• Temperature Rating : 65^oC
• Voltage Rating : 300/500V

Note : These cables are not suitable for direct connection to the public mains supply. Type II - Power Cable Product Group : A3I

• Applications :
  • BS5308 cables are used to carry voice and data services
  • Interconnection between electrical equipment and instruments, mainly in and around process plants, where transducer generated signals are transmitted through to panels, controllers and other devices
• Standards : BS5308 Part 1
• Conductor : Class 1, 2 or 5 plain copper conductors to BS EN 60228:2005 (previously BS6360)
• Pairing : Two insulated conductors uniformly twisted together with a lay not exceeding 100mm
• Insulation : PE (Polyethylene) to BS6234 or XLPE (Cross Linked Polyethylene) to BS5308 for LSZH (Low Smoke Zero Halogen) cables.
• Screen :
  • Individually Screened Pairs : Aluminum/Polyester tape is applied to each pair, metallic side down and in continuous contact with a 0.5 mm² tinned copper drain wire.
  • Collectively Screened Cables : Aluminum/Polyester tape is placed in continuous contact with a copper drain wire which is 0.5mm² tinned. It is applied metallic side down over the laid up pairs.
• Armoring : GSWB (Galvanized Steel Wire Armor) to BS1442
• Bedding : PE (Polyethylene) to BS6234
• Sheath : PVC (Polyvinyl Chloride) to BS7655 or LSZH (Low Smoke Zero Halogen)
• Temperature Rating : 65^oC
• Sheath Colour : Blue/ Black
• Voltage Rating : 300/500V
• Application : Process instrumentation.

Note : These cables are not suitable for direct connection to the public mains supply.