INSULATION TECH Power Saving Heater

The standard ceramic insulated band has been, and continues to be the only barrel heater having built-in thermal insulation. In what went before, machine manufacturers have chosen to use the heater because of several advantages, but infrequently for its heat conserving qualities.
The existing energy situation (in which the plastic processor must bare the inflated costs) is the reason for the development of the “INSULATION TECH” Power saving heater. MATRUSREE’s “INSULATION TECH ” power Saving Heaters are Specifically designed and engineered to meet the ever increasing demand for energy conservation and to improve operation efficiency capable of generating higher temperature essential to process today's high temperature resins….

Construction:

The "INSULATION TECH" Power saving heater consists of the standard ceramic band components and Specially Constructed insulation chamber with Reflector, all of which are enclosed in a SS Perforated Heat Sink Casing. The Special internal construction dramatically reduces power consumption up to 30%, in comparison to all other non-insulated band heaters. While the internal Steel Casing with high thermal conductivity guarantees maximum heat transmission to the plastification Cylinders.
We invite you to test run one of your injection machines with its present heater bands, recording the KWH used. Then, fit the same machine with "INSULATION TECH" Power Saving heaters and run it under identical conditions. In every case the savings realized will read out prompt conversion of all machine to "INSULATION TECH" or at least the phasing out of all other barrel heaters during routine maintenance.

Features:

• "MAXIMUM ENERGY SAVINGS, MINIMUM SHEATH TEMPERATURES."
• Perforated shell for cooling.
• Variety of termination & Clamping.
• Voltage: 230 V AC to 440V AC.
• Watt density: Max 45 w/in².

Application:

• PLASTICS PROCESSING MACHINERY
• EXTRUSSION
• INJECTION MOLDING
• HOLDING TANKS
• BLOW MOULDING
• PETROCHEMICAL
• THE FOOD INDUSTRY AND OTHERS.