Based in Vadodara, Gujarat, we are an esteemed manufacturer and supplier of Admittance Level Switches. Admittance Level Switch is used to measure level precisely. The Switch comprises of an evaluation unit and an immune coat probe which is usually mounted on the vessel. In order to achieve highest accuracy, the Switch makes use of 3-Electrode technique with a driven shield arrangement. The Calibration controls of these Switches are set-up in the evaluation unit, which also comprises of a special ten LED dot display. Our Admittance Level Switches are highly preferred by the clients, for their precision in measurements.

Detrails :

• Admittance based level switch with RF signal transmission between probe and evaluation unit via a co-axial cable with drain wire having driven shield arrangement to eliminate cable capacitance and drift due to change of cable capacitance with temperature. You can install the evaluation unit even far from the probe. The calibration controls are available in the evaluation unit. A special ten LED dot display/bar display simplifies calibration and indicates material trend in vicinity of the point level.
• The SLA...M Seriesswitch can be efficiently used to reduce the inventory as the same evaluation unit can be field configured either for High or Low level fail-safe detection. The SLA...M series Ignores build-up of service material between probe, the vessel walls and the coating. The level limit switch uses 3-Electrode technique with driven shield arrangement to achieve high degree of immunity.
  The measuring system for this level limit detection tool consists of an evaluation unit and an immune-coat probe that could be mounted either from the top or side of the vessel. The probe comprises sense and shield electrodes electrically isolated from the metallic tank by means of suitable insulators. The sense electrode of the switch and the vessel wall serve as the two electrodes of a capacitor with the service material as the dielectric. A change in material level causes a change in dielectric, which in turn causes a change in admittance of this tank capacitor.
•  The processed signal is used to energize or de-energize a relay whose output contacts are available for annunciation or control.
•  An accurate measurement of this change affords an indirect measure of the level of material in the tank. The evaluation unit measures the change of admittance accurately by using radio frequency (R.F.) technique coupled with coat immunizing circuitry.
• Many process industries viz. cement, power, steel, food, chemicals, fertilizer, sugar, detergent etc. have been using the SLA...M series for reliably measuring and self checking the level of service material which may include fine or coarse solids of low dielectric constant that have a tendency to stick. 
• A wide variety of probes with different mounting connections is available to suit various applications. We offer specially designed ceramic insulated rod / rope probe suitable for operating temperatures up to 600° C max.

Note : 

• Bar display is recommended for longer distance between probe and evaluation unit and for materials having tendency to absorb moisture.
• A wide variety of probes with different mounting connections is available to suit various applications. We offer specially designed ceramic insulated rod / rope probe suitable for operating temperatures up to 6000 C max.

Based in Vadodara, Gujarat, we are an esteemed manufacturer and supplier of Admittance Level Switches. Admittance Level Switch is used to measure level precisely. The Switch comprises of an evaluation unit and an immune coat probe which is usually mounted on the vessel. In order to achieve highest accuracy, the Switch makes use of 3-Electrode technique with a driven shield arrangement. The Calibration controls of these Switches are set-up in the evaluation unit, which also comprises of a special ten LED dot display. Our Admittance Level Switches are highly preferred by the clients, for their precision in measurements.

Detrails :

• Admittance based level switch with RF signal transmission between probe and evaluation unit via a co-axial cable with drain wire having driven shield arrangement to eliminate cable capacitance and drift due to change of cable capacitance with temperature. You can install the evaluation unit even far from the probe. The calibration controls are available in the evaluation unit. A special ten LED dot display/bar display simplifies calibration and indicates material trend in vicinity of the point level.
• The SLA...M Seriesswitch can be efficiently used to reduce the inventory as the same evaluation unit can be field configured either for High or Low level fail-safe detection. The SLA...M series Ignores build-up of service material between probe, the vessel walls and the coating. The level limit switch uses 3-Electrode technique with driven shield arrangement to achieve high degree of immunity.
  The measuring system for this level limit detection tool consists of an evaluation unit and an immune-coat probe that could be mounted either from the top or side of the vessel. The probe comprises sense and shield electrodes electrically isolated from the metallic tank by means of suitable insulators. The sense electrode of the switch and the vessel wall serve as the two electrodes of a capacitor with the service material as the dielectric. A change in material level causes a change in dielectric, which in turn causes a change in admittance of this tank capacitor.
•  The processed signal is used to energize or de-energize a relay whose output contacts are available for annunciation or control.
•  An accurate measurement of this change affords an indirect measure of the level of material in the tank. The evaluation unit measures the change of admittance accurately by using radio frequency (R.F.) technique coupled with coat immunizing circuitry.
• Many process industries viz. cement, power, steel, food, chemicals, fertilizer, sugar, detergent etc. have been using the SLA...M series for reliably measuring and self checking the level of service material which may include fine or coarse solids of low dielectric constant that have a tendency to stick. 
• A wide variety of probes with different mounting connections is available to suit various applications. We offer specially designed ceramic insulated rod / rope probe suitable for operating temperatures up to 600° C max.

Note : 

• Bar display is recommended for longer distance between probe and evaluation unit and for materials having tendency to absorb moisture.
• A wide variety of probes with different mounting connections is available to suit various applications. We offer specially designed ceramic insulated rod / rope probe suitable for operating temperatures up to 6000 C max.