UR Biocoction Horizontal Laminar Air Flow, For Labotary

Details 

• Ergonomic design for versatile usage, ease of use, plug & play system.
• Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions
• International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.
• Company is under Make in India & MSME Certified with International standard, certified model with duly mentioned brand name. Internal IQ/OQ/PQ Certification
• Material Of Construction:- Outer Body- CRCA Sheetepoxy Powder coated antibacterial& Antirust effect, 22 gauge ORStainless Steel-304PVC /Matt grit/ Sattin finish, 22 GAUGE
• Work table top:-SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE
• Front door and side covered with UV – protected 5 mm 
• Acrylic sheet to protect  customer from UV Exposure – complete transparent. Permanent magnet to hold 
• Air flow type: - Horizontal Air flow from the front. 
• Air Flow Velocity:- 90 FPM ±20%, Inflow Velocity: 0.53  m/s,Down flow Velocity: 0.33m/s
• Statically balanced motor blower Assembly (Heavy  Duty), 1440 rpm, ¼ hp. Noise of the  blower is less than 55 dBA& Very low vibration
• Filtration Assembly: - Room air is drawn from the bottom of the cabinet through a  Pre- Filter, then the air pass through HEPA Filter and spread evenly in the working area providing a constant a stream of clean air flow within the work area. 
• Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU – 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable. 
• HEPA Filteris Mini pleat type, made from water-resistant, fire retardant, imported micro-fine glass fiber media; conforms to EU – 14 Grade, with an efficiency rating better than 99.999% for 0.3 μ. These filters are designed to accommodate higher air flow volume.
• Perforated diffuser screen /shield mesh guard protect Filters from damage.
•  Front angular 10 degree slope helps reduce fatigue of user.
• Pressure manometer to track filter pressure & air/gas cock inside the working area
• Top removable panel for easy access to electrical fittings and easy removable filter placement for ease of access during service.
• Wheels: -Mounted on heavy tubular stand with lockable castors.
• Electricals fittings & Fixtures: -
• Microprocessor based PID Controller – UV ON-OFF, UV-Timer, Blower 3 speed control – High, Low, Medium, and Display of UV Age. 
• Fluorescent light – 20 watt, ˃800 lux, with chokes for lighting
• UV Light – 15 watt, Philips make
• Power supply -220-230 V, 50-60 Hz, 5/15 amps power cord.