We bring forth superior quality Viscosity Testing Machine in the market. The Viscosity Testing Machine is used to measure absolute viscosity of viscosity graded paving bitumen (IS: 73:2006) at 60oC in accordance with IS: 1206 (Part II) (similar to ASTM D 2171), which uses a vacuum capillary viscometer. Besides, any other viscometer such as rotational viscometer cannot be used to measure the absolute viscosity at 60oC since the bitumen in non Newtonian in nature at this temperature. We offer Viscosity Testing Machine conforming to IS: 1206 (Part II) Method for Testing Tar and Bitumen Materials: Determination of Absolute Viscosity with the following components: Constant Temperature Bath - A suitable bath for immersion of at least 2 vacuum capillary viscometer tubes with a digital temperature controller. The accuracy of the temperature in the bath will be Ã�± 0.1oC throughout the bathoVacuum System - Capable of maintaining a vacuum within Ã�± 0.05 cm of the desired level The system will consist of vacuum pump, moisture trap, vacuum regulator, bleed valve, all interconnecting tubing/piping, and any other accessory as needed to complete the vacuum systemThermometer for Bath - Mercury in glass, range 37.8 to 82oC, and graduations of 0.2oC.Timing Device - A stop watch or stop clock capable of reading up to Ã�½ secondCannon - Manning Vacuum Viscometers - With manufacturers' calibration certificate, viscometer holder and silicone cork. Size 12 and Size 13 (one each) [Size 12 is suitable for testing VG-10 and Size 13 is suitable for testing VG-20, VG-30, and VG-40 bitumen.

We bring forth superior quality Viscosity Testing Machine in the market. The Viscosity Testing Machine is used to measure absolute viscosity of viscosity graded paving bitumen (IS: 73:2006) at 60oC in accordance with IS: 1206 (Part II) (similar to ASTM D 2171), which uses a vacuum capillary viscometer. Besides, any other viscometer such as rotational viscometer cannot be used to measure the absolute viscosity at 60oC since the bitumen in non Newtonian in nature at this temperature. We offer Viscosity Testing Machine conforming to IS: 1206 (Part II) Method for Testing Tar and Bitumen Materials: Determination of Absolute Viscosity with the following components: Constant Temperature Bath - A suitable bath for immersion of at least 2 vacuum capillary viscometer tubes with a digital temperature controller. The accuracy of the temperature in the bath will be Ã�± 0.1oC throughout the bathoVacuum System - Capable of maintaining a vacuum within Ã�± 0.05 cm of the desired level The system will consist of vacuum pump, moisture trap, vacuum regulator, bleed valve, all interconnecting tubing/piping, and any other accessory as needed to complete the vacuum systemThermometer for Bath - Mercury in glass, range 37.8 to 82oC, and graduations of 0.2oC.Timing Device - A stop watch or stop clock capable of reading up to Ã�½ secondCannon - Manning Vacuum Viscometers - With manufacturers' calibration certificate, viscometer holder and silicone cork. Size 12 and Size 13 (one each) [Size 12 is suitable for testing VG-10 and Size 13 is suitable for testing VG-20, VG-30, and VG-40 bitumen.