Electric Gravity Separator, For Indsutrial, Voltage : 220V

We Offer Gravity Separator. Fans are Mounted On One Common Shaft Quick & Easy Interchangeable Deck Assembly Rests On Four Specially Designed Levers. all Steel Welded Frame. Adjustable Side and End Inclinations of the Deck Assembly. Adjust¬able Deck Speed Multiple Fan System with Individually Air Control for Each Fan Through “push – Pull” System. all These Adjustments Can Be Done While the Machine is in Operation. separate Spouts with Bag Holding Clamps At Bagging Off Height, for Each Separations I.e. Heaviest (stone and other Heavy Substances) Middling, Lighter and Lightest Substances. Rectangular Shape of Deck Provides Greater Capacity and Accuracy. Eccentrics are Perfect Keyed and Aligned On the Shaft to Avoid Any Unwanted Vibration. Feeding Hopper is Provided with Feed Control Device. the Product, Consisting of Approximately Equal Sized Grains/seeds/particles, is Gravity Fed from the Hopper to the Vibrating Deck. Oscillation Speed, Sidewise as Well as Lengthwise Inclination of Deck Air Stream Which is Created By Multi-fan System Under the Deck Cause the Grains/particles to Arrange Themselves in Layers of Uniform Specific Weight. the Lighter Particles Keep Floating in the Air Cushion But with the Oscillation Speed They Keep On Moving Towards Lower Edge of the Deck Where They are Collected in the Bag Through Spout. the Heavier Grains/particles Will Not Float in the Air Cushion & Thus Will Remain in Contact with the Deck Surface Which Will Migrate Them Towards the Upper Side of the Deck and are Collected Separately Into the Bags Through Spouts. in the Transition Zone, Between Heavy & Good Grains/particles, Some Grains/particles Float in the Air Cushion and Can Be Collected as Middling Depending Upon Requirement. the Machine is Complete with Suitable Electric Motor, Starter, Switch, One Deck Assembly and other Standard Features.