Loading Trucks and Shelves

INSULATED FLOOR AND TRUCK TRACKS

Standard Walk-In Ovens include a steel plate floor and provisions for a custom installed insulated floor. Floor plate is " thick in ovens up to 72" wide x 120" long; thick on wider models. A doorsill at the front edge of the floor plate maintains doorway rigidity and provides sealing surface for the oven doors. The doorsill is 2" high on 2750C and 3500C ovens; 3" high 4000C ovens.

At no charge, the doorsill can be eliminated, door lengthened and equipped with drag seals. This arrangement provides a floor level entrance to allow loading by hand truck, fork lift truck or by loading equipment to varying wheel spacing.

When loading with an over truck, installation of truck wheel guide is recommended. This allows the doorsill to remain across the work space opning. Floor level truck wheel guide track openings beneath the doors.

Truck wheel guide track width and centerlines may be specified to suit existing equipment or to be used with a loading track from the front of this bulletin. Guide tracks are generally wider than track wheel width. If not specified, tracks are provided 2 wide on centerlines 12" less than work space width.

• Truck Tracks to allow loading at factory floor truck loading limited to distributed floor loading of 100 Ibs per square foot level, flared at the front for easy entrance of wheels, includes truck track seals on door to close off track opening ..........................TT
• Insulated Floor with Recessed Truck Tracks provides reduced heat loss and improved temperature uniformity of insulated floor plus allows loading at factory floor level.......................................................................................................................IFRTT
• Insulated Floor with steel plate over, 2" for 2750C and 3500C, 3" at 4000C, minimizes heat loss and improves temperature uniformity near floor level, rated at 100 Ibs per square foot distributed loading..........................................................................IF
• Insulated Floor with Surface Truck Tracks use where oven will be recessed into the factory floor or loading with an extended ramp, includes drag seals on the oven door. Total........................................................................................................................IFSTT

• Programmable Temperature Controller, microprocessor based, digital indicating, thermocouple actuated, in lieu of standard controller......................................................................................................PTC3
• Recording Thermometer, thermocouple actuated, 24-hour, 10" diameter circular chart used in conjunction with standard controller..........................................................................................................RT
• Programmable Recording Temperature Controller, microprocessor based thermocouple actuated, digital display, 24-hour, 10" diameter circular chart, in lieu of standard controller..........................................................................................................PRTC3
• Digital Timing System, incorporated into standard temperature controller, 99 hour 59 minute range, starts timing when temperature reaches set point and shuts down oven at end of set time ..............................................................................DTS3
• Shut Down Timer, with continuous "hold" feature, 1,5,10 or 30 hour range............................................................................SDT
• Batch Timer, for uniformly timing batch operations, Continuous alarm with door interlock, alarms at end of preset time period untill door is opened or time reset. 1, 5, 10 or 30 hour range....................................................................................................BT
• Automatic Door Switch, turns off blower and heat when door is opened. Restores blower and heat on electric models, blower only on gas models, when door is closed................................................................................................................ADS
• Powered Forced Exhauster