Low Power Solar Inverter/UPS

Get Latest Price

Battery Low protection10.4 ± 0.2 VDC per Batt.
Float Charging Voltage13.7 ± 0.2 VDC per Batt.
Max. Charging Current (NC)29 Amp. ± 1.5Amp.
Output Voltage at No Load220 VAC ± 7 VAC
Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

Company Information

Member Since 8 Years
Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Report incorrect details

View Company Details

Product Details
Company Details

Max. Charging Current (HC)14A + 1A
Input Voltage Range (UPS Mode)180 to 260 VAC ± 5VAC
Output Voltage at No Load220 VAC ± 7 VAC
Battery Low protection10.4 ± 0.2 VDC per Batt.
Output Wave Form (At No Load)100% Pure Sine Wave
Short Circuit (Normal/ UPS)300%
Float Charging Voltage13.7 ± 0.2 VDC per Batt.
Max. Charging Current (NC)29 Amp. ± 1.5Amp.
Overload (Normal/ UPS)120%
Boost Charging Voltage14.4 ± 0.2 VDC per Batt.
Input Voltage Range (Normal Mode)100 to 280 VAC ± 5 VAC (Wide Range)
Battery Low alarm10.6 ± 0.2 VDC per Batt.
Charge Controller Efficiency> 98%
Changeover Time Maximum< 30 ms (in Normal Mode) and < 10 ms (in UPS Mode)
Max. Charging Current (NC)10A + 1A
Max. Charging Current (HC)32 Amp. ± 1.5Amp.
Output Frequency50.0Hz ± 0.5Hz

Solar Energy is a best alternative energy solution. The visible light from the SUN (Solar energy) can be converted into electric energy by Photovoltaic Cells. It has potential to cater the emerging needs of the power throughout the world. Solar Hybrid Inverters are cost effective and easy to install.
EAPRO True Hybrid Solar Home UPS is the most innovative and advance UPS that runs both on solar power (generated through solar panels) and the utility (grid) power supply. EAPRO True Hybrid Solar Home UPS is the advanced solar hybrid home UPS which charge the battery thru readily available solar energy/ Mains by using it’s artificial intelligence. It’s ISSRC logic use Solar Power for its maximize utilization to empower homes.

Model : Sx3 (Smart Solar Selection)
Ratings Available : EAPRO True Hybrid Solar Home UPS are available in the following rating.

2.5 KVA in 36 V DC
2.5/ 3.5/ 5 KVA in 48 V DC
2.5 KVA in 72 V DC
5 KVA in 96 V DC
5/ 7.5/ 10 KVA in 120 V DC
10/ 12 KVA in 180 V DC
12 KVA in 192 V DC
15 KVA in 240 V DC

Solar Panel Connected for 50Amps PWM/MPPT* Charge Controller (Max.) : 850 Watt panel per 12VDC
How EAPRO True Hybrid Solar Sine wave UPS is different from other Hybrid Solar UPS :

Intelligent Battery Charging and Load Sharing using High Performance Advance DSP based Pure Sine Wave Technology.
ISSRC Logic : Intelligent Solar Selection based on Real Clock Logic.
PWM/MPPT* Solar Charge Controller : Inbuilt fully regulated PWM/MPPT* (Maximum Power Point Tracking) Charge Controller to get optimum utilization of Solar Power.
Ability to provide rated Output Power directly from Solar Panels (if Solar Power is available) in addition to charges the battery simultaneously.
Intelligent battery charging from Solar and Mains by giving priority to Solar Power and only remain power consumes from Mains.
Ability to run the Output Load exclusively through Solar Power, saving Grid Power and your hard earned money.
Provides power from the battery upto 80% charging, when solar and grid power is available and battery is fully charged, resulting save money and save electricity.
Intelligent Thermal Management System : Programmed Inbuilt cooling fan which operates as needed with thermal protection to prevent undue loss of energy.
Provision to set ‘NO CHARGING of Battery from Mains’ (by pressing a button) for Charging through Solar Power Only resulting true power saving.
Wireless operational Mode (OPTIONAL)

Key Features

Operate on both Solar Power as well as Grid Power.
It is integrated with in-built fully regulated PWM/MPPT* Solar Charge Controller for max. Solar Power utilization.
It senses the availability of solar power, grid power and accordingly gives preference to charging through solar power and switches to the grid power if the solar power is not available.
It is designed to give you maximum benefit from the solar energy and minimize your electricity bill drastically.
Highly efficient battery charging from the solar energy as a result you will get non-stop power, save money, save electricity and protect the environment.
Advanced DSP based technology for absolute and stable 100% pure sine wave output.
Indications for Mains ON, UPS ON, Batt. Low, Charging/ Discharging, Over Load, Short Circuit, Thermal Trip, Solar available/ Not available and PV reverse on LCD Display.
User- friendly LCD for the display of mode of operation and all parameters.
Dual Mode of working : UPS and Normal

UPS Mode : Fast switching, Input operating range from 180V to 260V.
Normal Mode : Wide Input operating range from 100V.

Closed Loop Auto Sensing Software Control (ASSC) Smart Battery Charging Technology for longer battery life, while charging either by Solar power or grid power.
Dual selectable charging current option for Normal Charging and High Charging.
Intelligent overload sensing circuitry with auto retries facility.
Programmable thermal protection : cooling fan which operates as needed.
High Power new generation MOSFET cable to handle high in-rush/ surge current.
Double stage MOSFET Over Current Protection by measuring Rds ON.
Highest efficiency at lower cost.
Pure Sine Wave Output with low Total Harmonic Distortion (TDH).
Pulse by pulse current limiting with auto-reset resulting in efficient overload and short circuit protection.
Eco-friendly operation.
Solar PV reverse voltage Protection.
Electronic Over Current Charging Protection.
Reverse Current Flow Protection from Battery to Solar Panel generally during night.
No mechanical contact for charge Controller.
Designed for continuous reliable and robust operation.