LS 400 TOUCH Ultra-Sensitive Rheometer
A Rheometer with exttreme sensitivity
We recommend placing the LS400 TOUCH on a very stable stand or on an anti-vibration table (optional).
Specifications:
TYPE OF INSTRUMENT: Rotating rheometer following the COUETTE principle
SPEED RANGE: Unlimited number of speeds between 0.1 and 100 rpm
TORQUE RANGE: From 0 to 0.006 mNm
TEMPERATURE: The LS400 TOUCH is warmed up through liquid circulation from 10 to 60°C and has a Pt100 sensor (bath not included)
ACCURACY: +- 2 % of the torque value
DISPLAY: 7" Touch screen
DISPLAY SETTINGS: Viscosity | Speed | Torque | Temperature | Time | Measuring geometry | Level of sensitivity | Date hour | Choice of viscosity units: cP or mPa·s | Language: FrenchEnglish
DISPLAY SETTINGS IN FLOW MODE: Plastic Viscosity | Yield Value | Thixotropy | Choice of model: Newton – Bingham – Casson - Ostwald
SECURITY AND CONFIDENTIALITY: An "operator" function allows you to enter a username for your instrument. This user must then be identified using a 4-digit code. There is also a protected mode that locks your measurement conditions.

LS 400 TOUCH Ultra-Sensitive Rheometer
A Rheometer with exttreme sensitivity
We recommend placing the LS400 TOUCH on a very stable stand or on an anti-vibration table (optional).
Specifications:
TYPE OF INSTRUMENT: Rotating rheometer following the COUETTE principle
SPEED RANGE: Unlimited number of speeds between 0.1 and 100 rpm
TORQUE RANGE: From 0 to 0.006 mNm
TEMPERATURE: The LS400 TOUCH is warmed up through liquid circulation from 10 to 60°C and has a Pt100 sensor (bath not included)
ACCURACY: +- 2 % of the torque value
DISPLAY: 7" Touch screen
DISPLAY SETTINGS: Viscosity | Speed | Torque | Temperature | Time | Measuring geometry | Level of sensitivity | Date hour | Choice of viscosity units: cP or mPa·s | Language: FrenchEnglish
DISPLAY SETTINGS IN FLOW MODE: Plastic Viscosity | Yield Value | Thixotropy | Choice of model: Newton – Bingham – Casson - Ostwald
SECURITY AND CONFIDENTIALITY: An "operator" function allows you to enter a username for your instrument. This user must then be identified using a 4-digit code. There is also a protected mode that locks your measurement conditions.