Manifold Valves, Diameter (mm) : 40 Mm

Combines isolating and venting in a single valve, eliminating the need for tubing and fittings
Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling static pressure transmitters, switches or gauges to be removed without disturbing the permanent piping
installation
Block valve is located on the left side and the bleed valve is located on top in a 90° orientation, venting is to the right
100% helium leak tested to 1 x 10-4 mls for guaranteed performance and reliability
2000 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
2100 Series soft seat valves have 6,000 psi pressure rating @ 200 °F
2100 Series valve also features a replaceable Delrin® seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
Blow-out proof stem provides a secondary stem seal in the full
open position
FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Grafoil® packing optional
All stems are 316 stainless steel
Stem and bonnet threads are rolled for strength and ease of operation
One-piece bonnet with a metal-to-metal seal to the valve body below
the bonnet threads
Slotted spring pin to prevent accidental loosening
Vinyl dust caps for bonnets and stems (non-packing)
Zinc-nickel plated high tensile strength 4140 steel mounting bolts included for flanged connections