Listing ID #3992506
Company Information
Ask for more detail from the seller
Contact SupplierFlame Hardened Bed Ways
Chuck Plate
Change Gear Set (Inch & mm)
Tool Post Spanner
Center Adaptor
Dead Center 2 no.
Motor Pulley
Motor Railing 2 no.
Face plate
Carrier plate
steady rest,
follow rest,
Taper turning attachment
motorised coolant pump with tank and fittings,
Rear tool post with extended cross slide
Chuck back plates (Extra)
Electricals (Motor, Panel board, Wirings,
Push button Switches, V-belts and fittings),
Electrical Switch shaft and Splash guar
MODEL | AGL – 4 | AGL – 6 |
---|---|---|
Length Of Bed | 1370 mm(4′-6″) | 1830 mm(6′) |
Admit Between Center | 450 mm | 950 mm |
Floor Space | 1650×970 | 2100×970 |
Dimensions (mm) | 2000x1000x1500 | 2500x1000x1500 |
Centre Height over flat bed ways : | 215 mm | 215 mm |
Swing Over Bed : | 423 mm | 423 mm |
Swing Over Cross Slide : | 250 mm | 250 mm |
Swing in Gap : | 620 mm | 620 mm |
Width of Bed | 277 mm | 277 mm |
Type of Spindle Nose | Threaded |
Spindle bore | 38 mm |
Spindle Morse Taper | MT 5 |
Spindle Adapter Morse Taper | MT 3 |
Spindle Speeds | 8 |
Nos. / RPM Range | 54 to 1200 rpm |
Spindle Mounting on | Taper Roller Bearings |
Spindle Diameter | 50.8 mm |
Spindle Travel | 145 mm |
Spindle Morse Taper | MT-4 |
LEADING SCREW : Diameter / Threads : | 1.25″ (31.75 mm) / 4 TPI |
Nos. of Threads / Range | Metric : 17/0.5 mm to 15 mm pitch |
(For Fully norton Gearbox) | Inch : 40/2 to 60 tpi |
Suitable Electric | motor of 2 HP / 1.5 k.w., 3 Phase, 1440 RPM |
Reverse – Forward Switch, V-belts and fittings. |