Listing ID #4597488
Company Information
Ask for more detail from the seller
Contact Supplierbasic type of lathe that may be considered the archetypical class of metalworking lathe most often used by the general machinist or machining hobbyist. The name bench lathe implies a version of this class small enough to be mounted on a workbench (but still full-featured, and larger than mini-lathes or micro-lathes). The construction of a center lathe is detailed above, but depending on the year of manufacture, size, price range or desired features, even these lathes can vary widely between models.
Model | HML-4 | HML-6 | ||
SPECIFICATION | 4’.1/2”(1370 MM) | 6’.00”(1825 MM) | ||
INCH | MM | INCH | MM | |
BED WIDTH | 11” | 279 | 11” | 279 |
HEIGHT OF CENTRE OVER FLAT BED WAYS | 8” | 203” | 8” | 203” |
MAXIMUM SWING OVER BED | 16” | 405” | 16” | 405” |
MAXIMUM SWING OVER CROSS LIDE | 9” | 228” | 9” | 228” |
MAXIMUM SWING IN GAP | 23” | 580” | 23” | 580” |
ADMIT BETWEEN CENTRE | 25″ | 635″ | 34″ | 860” |
SPINDLE NOSE | 6TPI | 6TPI | ||
NUMBER OF SPINDLE SPEED | 6” | 6” | ||
DIAMETER OF HOLE THROUGH SPINDLE | 21/16” | 52 | 21/16” | 52 |
INCH RANGE THREADS | 4 TO 60 TPI | 4 TO 60 TPI | ||
METRIC RANGE THREADS | 0.5 TO 7.5 MM | 0.5 TO 7.5 MM | ||
LED SREW DIA & PITCH | 1.1/4” | 31.75 | 1.1/4” | 31.75 |
FEAD SAFT DIA | 7/8″ | 22.22 | 7/8″ | 22.22 |
TAIL STOCK SPINDLE TAPER BORE | Mt4 | Mt4 | ||
TAIL STOCK SPINDLE TRAVEL | 5.1/2 | 140 | 5.1/2 | 140 |
POWER REQUIRED | 2 HP 1440 RPM | 2 HP 1440 RPM | ||
APPROX WEIGHT | 650 KG | 750 KG |