MH150 Steel Strapping Head

Advantages

• Heavy strong construction
• High reliability 98%
• The perfect double notch joint of the tool A482 (A483) guarantees 75% of the tensile strength of the steel strap (similar
• to 80% reached with 3 punches but a lot higher then 55% with 2 punches necessary for small packs/coils)
• All current steel straps can be used with elongation from 600-1100N/mm2
• / 87000-160000psi or galvanised
• Packs can be dirty or with grease (no problems like with welding joints)
• Using seals available in the market (competitors ask for their own seal)
• The strap is tensioned through a profiled tension wheel, driven by motor-gear frequency controlled, adjustment by pneumatic clutch with manometer
• No tension released (not necessary an opposite joint or the Microlock joint)
• Min. parcel width is 80mm (90mm for 32mm) with hard package, the min coil diam. is approx. 400mm.
• Small hexagonal tubes with 85mm side
• Strapping line asymmetric for slit coils: radial strap through the eye for coils with ext. diameter 700-800mm
• Circumferential strap for coils with ext. diameter aprox.400mm
• Strap feed and retract speed is frequency controlled and therefore adjustable
• Low wearing material; wearing parts in contact with the seal are made for A482 (A483) so available in stock
• Mechanical switch/sensor to detect the parcel
• Std Vertical installation including an head stroke to strap packs with similar packs (in a range of 50mm)
• Option lateral installation to strap packs with Hmin=350mm with strap line at 300mm
• Option horizontal installation to strap packs with Hmin=200mm with strap line at 150mm

Options

• Head movement by steering wheel to the best position / External floating device
• Vertical or horizontal sword, fix or moving machine, with top and or side press, telescopic arc
• Device to place bunks and or corners on top/bottom/sides positions