Company Information
Member Since 16 Years
Nature of Business RetailerAsk for more detail from the seller
Contact Supplier
pecification (Structure)
PET film - Aluminum foil - LDPE
PET film – LDPE –Aluminum Foil –LDPE Paper – LDPE –Aluminum Foil –LDPE (Plain/Printed)
Application
1. Multilayer laminates are suitable to pack hygroscopic and moisture sensitive powder products. 2. Packing of food items as confectionery products
3. Any other use with the consent of manufacturer.
Compliances The product is fully compliant to the tests of FDA, REACH, RoHS and anti-microbiological.
Test Certificate:    Â
The test certificates provided on observed values with standard parameters or mutually agreed format.
â–º Above-mentioned specifications are for general guideline only and can be changed as part of continuous improvement programmer.
â–ºThe final product specification will be made as per customer requirement
Paper Type | Std. Paper GSM | GSM Tolerance | Surface |
Glassine | 41.0 | ± 5% | Suitable for printing & lamination |
Pet Type | Std. Pet Thickness (mic.) | Pet GSM | Tolerance limit | Surface |
Treated (Chemically/Corona | 12.0 | 16.8 | ± 5% | Suitable for printing & lamination |
23.0 |
32.2 |
± 5% |
LDPE Film
Low density polyethylene film is made in monolayer from 100 % virgin grade raw material with MFI 6 to 8 and through autoclave (low pressure) process without any mix up. It is clear, transparent and treated for perfect lamination.
Tolerance of LDPE Film thickness and Unit Weight g/sq.mtr.
LDPE Gauge | Thickness Tolerance (mic.) (±10%) | Unit Weight g/sq.mtr.(±10%) | ||||
Lower | STD | Upper | Lower | STD | Upper | |
75 ( Sandwich Layer) | 16.93 | 18.82 | 20.70 | 15.58 | 17.32 | 19.05 |
150 (Sealant Layer) | 33.88 | 37.65 | 41.41 | 31.17 | 34.64 | 38.10 |
200 (Sealant Layer) | 45.17 | 50.19 | 55.20 | 41.56 | 46.18 | 50.79 |
Foil Rolled from Aluminum Alloy - AA 1235 grade imported foil stock conforming to ICH Q3D Schedule, Rolled with FDA approved consumables and international guidelines on Health and Safety.
Standard Foil Thickness (mm) | Tolerance Limit mm (±8%) |
0.009 | ± 0.00072 |
0.012 | ± 0.00096 |
0.030 | ± 0.0024 |
Tolerances of Foil Gauge and Unit Weight:
Foil Thickness mm | Thickness Tolerance (mm) (±8%) | Unit Weight g/sq.mtr. (±8%) | Temper | Pin Holes (Nos./sq.mtr) | ||||
Lower Value | Standard Value | Upper Value | Lower Value | Standard Value | Upper Value |
|
| |
0.009 | 0.0083 | 0.009 | 0.0097 | 22.49 | 24.39 | 26.28 | Soft | 150 |
0.012 | 0.0110 | 0.012 | 0.0130 | 29.81 | 32.52 | 35.23 | Soft | 50 |
0.030 | 0.0276 | 0.030 | 0.0324 | 74.79 | 81.3 | 87.80 | Soft | 0 |
Recommended Operating Condition
Peeling Strength (Bond strength between PET & Alu.Foil) | 150 gms/15 mm (Min.) |
Peeling Strength (Bond strength between Alu.Foil & LDPE ) | 250 gms/15 mm (Min.) |
Sealing Strength (Bond Strength between LDPE to LDPE) | 550 gms/15 mm (Min.) |
Sealing Temperature | 160° C |
Sealing Pressure | 3.0 to 6.0 bar |
Dwell Time | 1.0 Sec |
Printing
Printing Surface | On Pet/Paper Side |
Design | As per customer’s approved artwork and design. |
Colors | Up to 8 Col on Primer side |
Length Register | ± 0.3 mm |
Finishing
Reel Width | As required within 900 mm |
Reel wandering | ± 0.5 mm edge wandering |
Width Tolerance | ±1mm |
Outside Diameter | Slit Reel – 350 & Jumbo 400 mm |
Core & Inside Diameter | Cardboard, Aluminium and PVC 76 mm ID suitable for shafts and pneumatic mandrel |
Joints | With red / brown colored BOPP tape with flap (max 2 per reel.) |
Packing and Labeling
Mode of Packing | Sea Worthy Packing |
Labeling | Each Reel / Jumbo Roll is identified with a sticker, which is pasted inside the core and has got following information: -
Specification/ Gauge/ Width/ Lot No./ Operator No./ Date/ Set No./ Machine name/ No. of Joints. |
Connect with us
For Buyer 
For Seller 
Help 
Pali, Rajasthan 
Send Enquiry