Aluminum profile frame Multiple Stations Sliding Door Test Machine

The equipment is designed to test the lifespan of hardware for sliding doors and folding doors, according to the requirements of the latest European standard for sliding doors (EN 1527:2019) on lifespan testing. The specific clauses are as follows: 

The equipment can test sliding doors and their hardware. A stepper motor drives the sliding door in reciprocating motion to check the durability of the door rollers and hangers; the travel distance and operating speed can be set via a touchscreen; the number of cycles can be set through the external panel of the controller, and it will automatically stop when the preset number is reached or in case of a fault. The stepper motor drive allows precise control of start/stop positions and operating speed. Movable photoelectric switches are installed at both ends of the test door to detect the door's open/close positions. When the door cannot open or close to the sensor position, the equipment automatically stops. 

By adding counterweights to the test door, different door weight testing requirements can be achieved.

Equipment Parameters:

a. Power Supply: AC220V 10A, 2000W, three-prong plug

b. Iron Frame: 5500x2700x2500(mm), baked paint, assembled on-site

c. Fixing Method: M10 anchor bolts

d. Test Stations: 6 stations

e. Test Doors: 6 doors, 2000mm x W800mm aluminum profile doors

f. Drive Stroke: 1300mm, maximum door weight 200kg (equipment does not include counterweight)

g. Drive Arm Pulling Force Range: 0~150N

h. Equipped with Dynamometer: 0~500N, moves at a uniform speed driven by the drive device, testing push-pull force

i. Controller: Set service life cycles, retains count display after power off, detects door positions at both ends, stops operation if the door is not fully closed

j. Standards Compliance: QB/T 4597-2013, EN 1527