Municipal Solid Waste Incinerator

Municipal waste incineration is the most advanced level of the waste disposal / treatment hierarchy: indiscriminate dumping, controlled dumping, landfilling, sanitary landfilling, and mechanical treatment. Solid waste arises from human activities- Domestic commercial, Industrial, agricultural, wastewater treatment, and so on.

Incineration system provides an effective means of reducing the volume of Municipal solid. Produced steam can be used purpose of heating or power generation. Municipal solid waste incinerator is turned waste into ash and combustible gases at 1000°C in primary chamber The temperature is raised to 1100°C for at least 2 seconds to incinerate the wastes with a content of more than 1% of halogenated organic substances. The incinerator reduces most combustible solid waste to nearly 2-3 percent by volume and 5 percent by weight.

CONTROL

Fully automatic sequential control provided by internal PLC system providing control of:

1. Primary Chamber
2. Secondary chamber pre-heat
3. burn cycle (variable)
4. cool down cycle

Primary Chamber:

• Fully insulated internal refractory lining, constructed from high grade refractory brick ensuring a self-supporting interlocked arrangement.
• Manually operated, access lid.
• Waste ignition burner, temperature controlled on-off, complete with internal air fans
• A pre-cast blocks impact zone that protects the refractory lining when loading.

Secondary Chamber:

• Fully insulated internal refractory lining, constructed from high grade low thermal mass insulation.
• Secondary chamber burnout burner, temperature controlled on-off, complete with internal air fans.
• Integrated combustion burner air fans with automatically controlled distribution to their designated area.
• Temperature sensor mounting point of the chamber ensuring the chamber reaches the necessary 850°C minimum.

FUEL OPTIONS

• Electrical
• Diesel
• LPG
• Natural Gas

TEMPERATURES

• Main chamber: 750°C – can reach in excess of 1000°C*
• Secondary chamber: 850°C – 1100°C*

BURNERS

Fully automatic, high-efficiency burners with electronic ignition, flame recognition and combustion control devices fitted.

CONSTRUCTION

Steel welded fabrication consisting of sheet steel and structural section supports.

ASH REMOVAL

Easy and safe manual ash removal from the primary chamber.