MYMIX RITESEAL Waterproofing System

Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

MYMIX RITESEALTM (Waterproofing System) is powder based single component, high polymer modified, elastomeric, waterproof coating for all kind of cementitious surfaces. It has very high water....

View More Details

Send Enquiry

Company Information

Sanghavi Group

Makarba, Ahmedabad, Gujarat

View Number

Member Since 7 Years
Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Report incorrect details

View Company Details

Product Details
Company Details

MYMIX RITESEALTM (Waterproofing System) is powder based single component, high polymer modified, elastomeric, waterproof coating for all kind of cementitious surfaces. It has very high water permeability against hydrostatic pressure with standing capacity. It is to be mixed with water and applied by paintbrush.

Suitable Substrates:

All cementitious RCC plastered surfaces
Interior and Exterior wet areas

Coverage:

Two coats 1 sq. mt./ kg.

Application:

Swimming pool waterproofing
Toilets and bathrooms sunk area
All cement based basements
Overhead & Underground water tanks
Roof and slabs
Dam, water towers, Reservoirs and channels
ACC blocks and cement boards

Advantages:

Excellent adhesion to cement surfaces
Excellent Waterproofing and crack – over bridging ability
Highly effective for positive & negative sides of hydrostatic pressure
It was high water permeability and is easy to use
Very good UV resistance
Positive side permeability : 5 – 7 Bar
Negative side permeability : 1.5 Bar
Non – Toxic

How to apply :

Clean Application Area from dust & grease
Pour 3.8 liter to 4 liter water in a bucket
Add 10 kg product in the Bucket
Mix thoroughly preferably with mechanical stirrer or manually
Wait for 5 minutes
Pre-wet application area, avoid direct sunlight
Apply the paste on the surface with a brush
Wait for 2 hours
Apply 2nd coat to get uniform surface
Wait for 24 hours before use

Packing

1 kg pouch and 10 kg bag

Shelf Life:

Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in

Technical Details:

S . No	Testing Parameter	Specification
1	RITESEAL - Mixing Ratio	8.5 to 9.5 litre water for 25 kg Material Approx: 34 - 38% by weight
2	Product Colour	Grey
3	Tensile Strength in Mpa
3.1	After 07 days	1.54 Mpa
3.2	After 28 days	1.74 Mpa
4	Compressive Strength in Mpa
4.1	After 07 days	6.8 Mpa
4.2	After 28 days	10.95 Mpa
5	Setting Time
5.1	Initial Setting time in Minute	600 min
5.2	Final Setting time in Minute	1250 min
6	Flexural Strength in Mpa	2.25 Mpa
7	Wet density in gm/cc	1.4 - 1.8 gm/cc
8	Pot Life	2 hours
9	Water Absorption by Karsten Tube (30 min)	0.05 ml